Operation Manual

49
NEDERLANDSENGLISHDEUTSCH
Display & Control; Midmotor models
Display sengs
If you press ‘ ‘ 2 mes quickly aer each other, the
sengs menu appears. U can scroll through the sengs
by pressing ‘ ‘ a single me.
Seng opons in the seng menu:
Km/mile
After pressing ‘ ‘ a single time in the settings
menu, ’S7’ appears. With ‘ ‘ / ‘ ‘ you can switch
between; KPH (kilometer per hour) or in MPH (miles
per hour).
Light sensivity
Your bike is fitted with a light sensor. This sensor can
automatically turn on your lights. After pressing ‘ ‘
two times in the settings menu, ’bL0’ appears. With
‘ ‘ / ‘ ‘ you can increase or decrease the light
sensitivity. You lighting can automatically switch on at
sunset or at dusk depending on the sensitivity.
Background lighng
You can adjust the background lighng brightness at
the ‘bL1’ menu. With ‘ ‘ / ‘ ‘ you can chose a low
brightness, level 1, or a high brightness, level 5.
Error codes
Your bike is ed with a self diagnosc funcon. If
‘ ‘ appears a number appears aswell in the ‘speed’
window
‘03’; Brake signal failure. Check if the brake is not
applied when this error code occurs.
‘06’; Low voltage of the baery. Please check if the
baery is not empty.
‘21’; Speedsensor failure. Check if the magnet mounted
in the rear will is posioned correctly when passing the
speedsensor.
It is possible that other problems occur. In that case,
be in contact with your dealer soon so that a potenal
repair can be executed fast.