Operation Manual

45
NEDERLANDSENGLISHDEUTSCH
Display & Controls: Rearmotor and frontmotor models
SET 6: Baery informaon
With the ‘PLUS’ and ‘MINUS’ buons you can see the
following informaon of the baery: The percentage of
the remaining battery-capacity, the total charging-cycli
and the actual battery voltage.
Failure codes
It is possible that failures occur. If this happens, go to
the dealer as soon as possible so repairs can be carried
out quickly. The following codes can be displayed on
the display:
Error 1: Problem with 3-phase control from the
controller
Error 2: Problem with throle connecon (start-
detecon)
Error 3: Motorcable 3-phase wiring loose or defecve
Error 4: Motorcable Hall Sensor signal malfuncon
(malfuncon in motor or motorcable)
Error 5: Malfuncon in brake sensor(signal)
Error 6: Baery voltage too low
Error 7: Motor stalled
Error 8: Malfuncon in controller (signal)
Error 9: Malfuncon in display (signal)
SET 2: Seng the speedlimiter
With the ‘PLUS’ and ‘MINUS’ you can adjust the
speedlimiter. With this you can limit the maximum
speed in which the motor provides power. This can be
handy if you prefer to drive on lower speeds.
SET 3: Seng the Tire-size
Set the correct re-size for more exact informaon on
the screen. On the side of every re you can nd the
size. The pre-set sizes may deviate a lile. This means
that the amount of driven kilometers has a maximum
deviaon of 5%.
16 inch 50-305 Circumference: 1272 mm
20 inch 47-406 Circumference: 1571 mm
20 inch 53-406 Circumference: 1590 mm
24 inch 50-507 Circumference: 1907 mm
26 inch 50-559 Circumference: 2070 mm
28 inch 37-622 Circumference: 2187 mm
28 inch 40-622 Circumference: 2205 mm*
28 inch 42-622 Circumference: 2218 mm
28 inch 47-622 Circumference: 2249 mm
28 inch 50-622 Circumference: 2268 mm
* Standard your bike is provided with 40-622 res
SET 4: (Speed) Units
With the ‘PLUS’ and ‘MINUS’ buons you can switch
between kilometers (per hour) and miles (per hour).