Phone User Guide S1 by SANYO® www.qwest.com Copyright © 2007 Qwest Communications International, Inc. All rights reserved. No reproduction in whole or in part without prior written approval. Qwest is a trademark of Qwest Communications International Inc. Sprint is a trademark of Sprint Nextel. SANYO is a registered trademark of SANYO Electric Co., Ltd. All other trademarks are the property of their respective owners.
Table of Contents Welcome to Qwest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ii Your Phone’s Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii Section 1: Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . .1 1A. Setting Up Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Setting Up Your Phone . . . . . . . . . . . . . . . . . . . .
2C. Setting Your Phone’s Security . . . . . . . . . . . . . . . . . . . . . . .65 Accessing the Security Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66 Using Your Phone’s Lock Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66 Restricting Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68 Using Special Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69 Erasing Phone Content . . . . . . . .
Assigning an Image to a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . .93 Assigning a Ringer Type to an Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93 Secret Contacts Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94 2G. Using the Phone’s Calendar and Tools . . . . . . . . . . . . . . . . .95 Using Your Phone’s Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96 Using Your Phone’s Tools . . . . . . . . . . . .
Section 4: Safety and Warranty Information . . . . . . . . . . .155 4A. Important Safety Information . . . . . . . . . . . . . . . . . . . . . . .156 General Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157 Maintaining Safe Use of and Access to Your Phone . . . . . . . . . . . . . . . . .158 Caring for the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160 Radio Frequency (RF) Energy . . . . . . . . . . . . . . . . . . . . . . . . .
Welcome to Qwest® This guide will familiarize you with wireless service and your new phone through simple, easy-to-follow instructions. It’s all right here – from setting up your account passwords and voicemail to using the most advanced features of your new phone. Welcome and thank you for choosing Qwest®.
Introduction This Phone User Guide introduces you to wireless service and all the features of your new phone. It’s divided into four sections: Section 1: Getting Started Section 2: Using Your Phone Section 3: Qwest® Service Features Section 4: Safety and Warranty Information Throughout this guide, you’ll find tips that highlight special shortcuts and timely reminders to help you make the most of your new phone and service.
Your Phone’s Menu The following table outlines your phone’s list menu structure. For more information about using your phone’s menus, see “Navigating Through Phone Menus” on page 20.
4: IM & EMAIL 5: CHAT & DATING 6: VOICEMAIL 1: Call Voicemail 4: Clear Count 2: Call:Speaker On 3: Details 2: Preset Msgs 3: Text 7: SETTINGS 1: Notification 5: MY CONTENT 1: GAMES 1: Get New 2: My Content Manager 2: RINGERS 1: Get New 2: My Content Manager 3: SCREENSAVERS 1: Get New 2: My Content Manager 4: APPLICATIONS 1: Get New 2: My Content Manager 5: IM & EMAIL 1: Get New 6: WEB iv 2: My Content Manager
7: TOOLS 1: VOICE SERVICES 1: Voice Memo 2: Screen Call 3: Voice Tag 2: BLUETOOTH 3: CALENDAR 4: ALARM CLOCK 5: CALCULATOR 6: STOPWATCH 7: WORLD CLOCK 8: UPDATE PHONE 9: PARENTAL CTRL 8: SETTINGS 1: SOUNDS 1: Ringer Type 1: Incoming Calls 4: Calendar/Alarm 2: Voicemail 3: Messaging 2: Advanced Ring.
2: DISPLAY 1: Backlight 1: Main LCD 2: Key 2: PWRsave Mode 3: Greeting 4: Font Size 5: Background 6: Contrast 7: Animation 1: Standby 8: Incoming Calls 9: Match AreaCode 10: Screen Saver 11: Clock/Calendar 12: Main Menu 13: Return to Idle 14: Sleep Mode 3: DATA 1: Enable/Disable Data 2: Net Guard 3: Update Profile 4: LOCATION vi 2: Outgoing Calls 3: Service Search
5: BLUETOOTH 1: Enable/Disable 2: Visibility 3: Voice Priority 4: Device Name 5: Device Info 6: ROAMING 1: Set Mode 2: Call Guard 3: Data Guard 7: MESSAGING 1: Notification 2: Preset Msgs 3: Text 1: Send Callback# 2: Signature 3: Drafts Alert 2: Lock Now 3: On Power-up 2: Erase Content 5: Reset Browser 8: Reset Phone 3: Erase V. Memo 6: Reset Favorit.
9: OTHERS 1: Airplane Mode 2: Text Entry 1: Auto-Capital 4: Default Input 7: Add Word 2: My Words 5: Auto-Space 8: Help 3: Inpt Language 6: T9 Settings 3: Any Key Answer 4: Auto Answer 1: Hands-free 2: Speakerphone 5: Abbrev.
Section 1 Getting Started
Section 1A Setting Up Service In This Section Setting Up Your Phone (page 3) Setting Up Your Voicemail (page 5) Account Passwords (page 6) Getting Help (page 7) Setting up service on your new phone is quick and easy. This section walks you through the necessary steps to set up and unlock your phone, set up your voicemail, establish passwords, and contact Qwest for assistance with your wireless service.
Setting Up Service Setting Up Your Phone 1. Install the battery (if necessary). Slide the battery release latch and then slide the battery cover and remove it from the back of the phone. Insert the battery into the opening, making sure the connectors align. Gently press down to secure the battery. Replace the battery cover and slide it until you hear a click. Then, slide the battery release latch. (See “Installing the Battery” on page 18 for the illustration.) 2.
Unlocking Your Phone Your phone should be unlocked when you purchase it or when it arrives. In the event it needs to be unlocked, follow these steps to unlock it. 1. Press and hold to turn the phone on. 2. Press Unlock (left softkey). Note To select a softkey, press the key directly below the softkey text that is displayed at the bottom left and bottom right of your phone’s display screen.
Setting Up Service Setting Up Your Voicemail All unanswered calls to your phone are automatically transferred to your voicemail, even if your phone is in use or turned off. Therefore, you will want to set up your voicemail and personal greeting as soon as you receive your phone. To set up your voicemail: 1. From standby mode, press and hold . 2. Follow the system prompts to: Note Create your passcode. Record your name announcement. Record your greeting.
Account Passwords As a Qwest customer, you enjoy unlimited access to your personal account information, your voicemail account, and your data services account. To ensure that no one else has access to your information, you will need to create passwords to protect your privacy. Account Password If you are the account owner, you’ll have an account password to sign on to www.qwest.com and to use when calling Qwest Wireless® Customer Service.
Setting Up Service Getting Help Visit www.qwest.com You can go online to: Review coverage maps. Access your account information. Find information and accessories for your phone. And more. Reaching Qwest Wireless Customer Service You can reach Qwest online or by phone: Sign on to your account at www.qwest.com. Call us toll-free at 1-888-879-0611.
8
Section 2 Using Your Phone
Section 2A Phone Basics In This Section Your Phone (page 11) Viewing the Display Screen (page 13) Features of Your Phone (page 15) Turning Your Phone On and Off (page 16) Using Your Phone’s Battery and Charger (page 17) Navigating Through Phone Menus (page 20) Displaying Your Phone Number (page 21) Making and Answering Calls (page 22) Entering Text (page 35) Your phone is packed with features that simplify your life and expand your ability to stay connected to the people and information
Your Phone 16. Side VOICE MEMO Key 17. Side Volume Key 1. Earpiece 18. Side SPEAKER Key 19. Speaker 3. Navigation Key 15. LED Indicator 4. Left Softkey 14. Right Softkey 5. MENU/OK Key 13. END/POWER Key 6. TALK Key 7. Keypad Phone Basics 2. Main LCD (display) 12. BACK Key 11. Charger Jack 10. Headset Jack 8. Microphone 9. Internal Antenna Key Functions 1. Earpiece lets you hear the caller and automated prompts. 2.
7. Keypad lets you enter numbers, letters, and characters, and navigate within menus. Press and hold keys 2–9 for speed dialing. 8. Microphone allows other callers to hear you clearly when you are speaking to them. 9. Internal Antenna facilitates reception and transmission. To maximize call performance, do not obstruct the internal antenna area. (See page 22.) 10. Headset Jack allows you to plug in an optional headset for convenient, hands-free conversations (for monaural headset only).
Viewing the Display Screen Your phone’s display screen provides a wealth of information about your phone’s status and options. This list identifies the symbols you’ll see on your phone’s display screen: Phone Basics Tip To view a list of your phone’s icons and descriptions, from the main menu select Settings > Phone Info > Icon Glossary. indicates your current signal strength. The more lines you have, the stronger your signal. indicates your phone cannot find a signal. indicates a call is on hold.
indicates the handset is discoverable by another Bluetooth device. indicates the handset is connected to a Bluetooth device (green icon). indicates the handset is communicating with a Bluetooth device. indicates access to a secure site. indicates battery charge level (icon shown is full). The more black you see, the more power you have left (icon is animated while charging). indicates your battery is charging in “Power Off” state. indicates volume level (1 to 8) with vibrate is set.
indicates the Car Kit device is set to on. indicates the wired Headset device is set to on. Note Phone Basics Display indicators help you manage your roaming charges by letting you know when you’re off the home network. (For more information, see Section 2D: Controlling Your Roaming Experience on page 76.) Features of Your Phone Congratulations on the purchase of your phone. The S1 by SANYO is lightweight, easy-to-use, and reliable, and it also offers many significant features and service options.
T9 Text Input lets you quickly type messages with one keypress per letter (page 36). Speed dial lets you dial phone numbers stored in your Contacts directory with one keypress (page 92). The built-in Bluetooth technology allows you to connect wirelessly to a number of Bluetooth devices to share information more easily than ever before (page 114). Turning Your Phone On and Off Turning Your Phone On To turn your phone on: Press and hold .
Turning Your Phone Off To turn your phone off: Press and hold for two seconds until you see the powering down animation on the display screen. Phone Basics Your screen remains blank while your phone is off (unless the battery is charging). Using Your Phone’s Battery and Charger WARNING Use only Qwest-approved or manufacturer-approved batteries and chargers with your phone.
Installing the Battery To install the Li-Ion battery: 1. Insert the battery into the opening on the back of the phone (1) and gently press down (2). 2. Place the battery cover into the position as indicated in the diagram (3), and slide it until you hear it snap into place. Then, slide the battery release latch. 1 2 3 Removing the Battery Do not handle a damaged or leaking Li-Ion battery as you can be burned. WARNING To remove your battery: 1.
Charging the Battery Your phone’s Li-Ion battery is rechargeable and should be charged as soon as possible so you can begin using your phone. Phone Basics Keeping track of your battery’s charge is important. If your battery level becomes too low, your phone automatically turns off, and you will lose all the information you were just working on. For a quick check of your phone’s battery level, glance at the battery charge indicator located in the upperright corner of your phone’s display screen.
Navigating Through Phone Menus The navigation key on your phone allows you to scroll through menus quickly and easily. The scroll bar to the right of the menu keeps track of your position in the menu at all times. To scroll through a menu, press the navigation key up or down. If you are in a first-level menu (after selecting an item in the main menu), you may also navigate to the previous or next first-level menu by pressing the navigation key left or right.
Backing Up Within a Menu To go to the previous menu: Press . To return to standby mode: Press Phone Basics . Displaying Your Phone Number Just in case you forget your phone number, your phone can remind you. To display your phone number: Press > Settings > Phone Info > Phone#/UserID. (Your phone number and other information about your phone and account will be displayed.) Tip You can also display your phone number through the Contacts menu. Press MENU > Contacts > My Name Card.
Making and Answering Calls Holding Your Phone To maximize performance, do not obstruct the bottom portion of your phone where the internal antenna is located while using the phone. Correct Incorrect Internal Antenna Making Calls Placing a call from your phone is as easy as making a call from any landline phone. Just enter the number, press , and you’re on your way to clear calls. To make a call using your keypad: 1. Make sure your phone is on. 2. Enter a phone number from standby mode.
Tips To redial your most recent call (outgoing, incoming, or missed), press TALK twice. When making calls off the home network, always dial using 11 digits (1 + area code + phone number). Note Phone Basics You can also place calls from your phone by using speed dial numbers (page 34), using your Contacts (page 33), using your Call History listings (page 84), and by using Voice-Activated Dialing (page 107). To use a Voice Dial, you must have stored Voice Dial entries.
Dialing Options When you enter numbers in standby mode, press Options (right softkey) to display the following dialing options. To initiate an option, highlight it and press 24 . Abbrev. Dial to dial the phone number in your Contacts list that ends with the digits you entered. (See “Setting Abbreviated Dialing” on page 63.) Call to dial the phone number. Call:Speaker On to dial the phone number in speakerphone mode. Send Text to send an SMS Text message (page 132).
Answering Calls 1. Make sure your phone is on. (If your phone is off, incoming calls go to voicemail.) 2. Press Phone Basics to answer an incoming call. (Depending on your phone’s settings, you may also answer incoming calls by pressing any number key. See “Setting Any Key Answer” on page 62 for more information.) Your phone notifies you of incoming calls in the following ways: The phone rings or vibrates. The indicator light flashes. The backlight illuminates.
Answering a Roam Call With Call Guard Enabled Call Guard is an option that helps you manage your roaming charges when making or receiving calls while outside the home network. Please see Section 2D: Controlling Your Roaming Experience on page 76 for more information about roaming. To answer a call when you are roaming and Call Guard is enabled: 1. Press . 2. Press Note to proceed while the pop-up message is displayed. When your phone is off, incoming calls go directly to voicemail.
Missed Call Notification When an incoming call is not answered, the Missed Call log is displayed on your screen. To call the Missed Call entry from the notification screen: Phone Basics Press Call (left softkey). To display a Missed Call entry from standby mode: 1. Press > Missed Alerts. 2. Highlight the entry you wish to view and press . Calling Emergency Numbers You can place calls to 911 (dial is locked or your account is restricted.
To exit Emergency mode: 1. Press to end a 911 call. 2. Press Options (right softkey) to display the options menu. 3. Highlight Exit Emergency and press Note . When you are in Emergency mode, you can exit only from the options menu. To select Emergency mode options: 1. Press to end a 911 call. 2. Press Options (right softkey). Call 911 to call 911. Call 911:Spkr. to call 911 in speakerphone mode. Exit Emergency to exit Emergency mode. 3. Highlight an option and press .
In-Call Options WARNING Tip Phone Basics Pressing Options (right softkey) during a call displays a list of features you may use during the call. To select an option, press the corresponding keypad number or highlight the option and press . The following options are available through the Options menu: Flash to answer an incoming Call Waiting call or to connect a third party during Three-Way Calling. Mute or Unmute to mute or reactivate your phone’s microphone.
End-of-Call Options To display the following options, press Options (right softkey) within 10 seconds after disconnecting a call. To select an option, highlight it and press . Call Again to dial the phone number. Call:Speaker On to dial the phone number in speakerphone mode. Send Text to send a Text message. Save Phone# to save the phone number in your Contacts list. Show Contact is displayed when the number is already in your Contacts list.
Saving a Phone Number Phone Basics Your phone can store up to 200 Contacts entries. Contacts can store up to a total of 500 phone numbers, and each Contacts entry’s name can contain up to 32 characters. Your phone automatically sorts the Contacts entries alphabetically. (For more information, see Section 2F: Using Contacts on page 86.) To save a number from standby mode: 1. Enter a phone number and press Options (right softkey) > Save Phone#. 2.
Finding a Phone Number You can search Contacts entries for phone numbers that contain a specific string of numbers. To find a phone number: 1. Enter the last four or more digits of the number in standby mode. (The more numbers you enter, the more specific the search becomes.) 2. Press Options (right softkey) > Find. (The Contacts entry matching the entered numbers will be displayed.) 3.
To dial or save phone numbers with pauses: 1. Enter the phone number. 2. Press Options (right softkey) and select either Hard Pause or Phone Basics 2-Sec. Pause. (Hard pauses are displayed as a “P” and two-second pauses as a “T.”) 3. Enter additional numbers. 4. Press to dial the number. – or – Press Options (right softkey) > Save Phone# to save the number in your Contacts. When dialing a number with a hard pause, press TALK to send the next set of numbers.
Using Speed Dialing With this feature, you can dial your favorite entries using one keypress for locations 2–9. (See “Assigning Speed Dial Numbers” on page 92.) To use speed dial : 34 From standby mode, press and hold the appropriate key for approximately two seconds. The display confirms that the number has been dialed when it shows “Connecting...”.
Entering Text Selecting a Character Input Mode Phone Basics Your phone provides convenient ways to enter words, letters, punctuation, and numbers whenever you are prompted to enter text (for example, when adding a Contacts entry or when using SMS Text Messaging). To change the character input mode: 1. When you display a screen where you can enter text, press Mode (right softkey) to change the character input mode. 2.
Tip Signature to enter your signature. (See page 56.) Select Lang. to select the language (English or Spanish). Erase All to erase all text (if applicable). Select Text to select stored text for copying or cutting. Add Word to store words that you use frequently. (See page 37 .) Text Options to display the Text Entry settings menu. (See page 61.) When entering text, press [Shift*] to change the capitalization style (ABC > abc > Abc).
Adding a Word to the T9 Database If a word you want to enter is not displayed as an option when you are using T9 Text Input, you can add it to the database. To add a word to the T9 Text Input database: Phone Basics 1. Select the Add Word input mode. (See “Selecting a Character Input Mode” on page 35.) 2. Enter the word using Alphabet mode (multi-tap key entry) and press Save (left softkey). (See “Entering Characters Using Alphabet Mode” on page 39.
Customizing the T9 Settings To customize the T9 Settings: 1. Press > Settings > Others > Text Entry > T9 Settings. 2. Select an option and press . Word Prediction to automatically display the word that may follow the current text input. Word Completion to show the completed words that match the keys you have entered without entering the whole word. Word Scan to allow T9 text input to recognize words by searching Contacts and messages. Word Choice List to display the word choice list.
Entering Characters Using Alphabet Mode Phone Basics To enter characters using Alphabet mode (multi-tap key entry): 1. Select the Alphabet mode. (See “Selecting a Character Input Mode” on page 35.) 2. Press the corresponding key repeatedly until the desired letter appears. (For example, to enter the word “Bill,” press twice, three times, three times, and then press three times again.) (If you make a mistake, press to erase a single character. Press and hold to delete an entire word.
Section 2B Controlling Your Phone’s Settings In This Section Sound Settings (page 41) Display Settings (page 47) Location Settings (page 53) Messaging Settings (page 54) Airplane Mode (page 57) TTY Use (page 58) Phone Setup Options (page 59) Using the available menu options, you can customize your phone to sound, look, and operate just the way you want it to. This section describes how you can change your phone’s settings to best suit your needs.
Sound Settings Ringer Types Ringer types help you identify incoming calls and messages. You can assign ringer types to individual Contacts entries, types of calls, and types of messages. Preprogrammed Ringers include a variety of standard ringer types and familiar music. Vibrating Ringer alerts you to calls or messages without disturbing others. Downloaded Ringers can be downloaded right to your phone. (See “Downloading Content” on page 148.
Selecting Ringer Types for Voicemail, Messaging, or Calendar/Alarm To select a ringer type for voicemail, messaging, or calendar/alarm: 1. Press > Settings > Sounds > Ringer Type. 2. Select Voicemail, Messaging, or Calendar/Alarm. 3. Select a ringer type (Single Tones, Ring Tones, Melodies, or Voice Ringer/Voice Alarm) or My Content, and press . 4. Use your navigation key to scroll through the available ringers. A sample ringer will sound as you highlight each option. 5. Press to assign a ringer.
Selecting a Tone Length Your phone offers two options for selecting the audible tones accompanying a keypress. (Longer tone lengths may be better for tone recognition when dialing voicemail or other automated systems.) To select a tone length: 1. Press > Settings > Sounds > Others > Tone Length. Your Phone’s Settings 2. Select Short or Long. Setting a Start-up/Power-off Tone To set a start-up/power-off tone: 1. Press > Settings > Sounds > Others. 2. Select Start-up Tone or Power-off Tone. 3.
Setting Up Key Press Echo With this feature, you can hear a voice say the numbers when you press the keypad. This feature is available when you are in standby mode. To turn Key Press Echo on or off: 1. Press > Settings > Sounds > Others > Key Press Echo. 2. Select On or Off. Adjusting the Phone’s Volume Settings You can adjust your phone’s volume settings to suit your needs and your environment. Adjusting the Ringer Volume To adjust the ringer volume: 1. Press > Settings > Sounds > Volume > Ringer.
Adjusting the Alert Volume This setting controls the alert volume for Voicemail, Messaging, and Calendar/Alarm. You can set the alert volume separately from the ringer volume setting. To adjust the alert volume: 1. Press > Settings > Sounds > Volume > Advanced Ring. Your Phone’s Settings 2. Select Voicemail, Messaging, or Cal./Alarm. 3. Using the navigation key, select Separate Vol. 4. Press the navigation key right or left to choose a volume level, and press Done (left softkey).
Alert Notification Your phone can alert you with an audible tone when you change service areas, once a minute during a voice call, when there are incoming messages or voicemail, or when your network signal is fading. To set alerts: 1. Press > Settings > Sounds > Alerts. 2. Select Service, Voicemail, Messaging, Minute Beep, or Signal Fade and press . 3. Use your navigation key to select a setting and press . Silence All There may be times when you need to silence your phone entirely.
Display Settings Changing the Text Greeting The text greeting can be up to 15 characters and is displayed on your phone’s screen in standby mode. You may enter your own custom greeting or choose the preset greeting. To enter your own custom greeting: Your Phone’s Settings 1. Press > Settings > Display > Greeting > Custom. 2. Enter a custom greeting using your keypad and press . (See “Entering Text” on page 35.) (To erase the existing greeting one character at a time, press .
Changing the Display Screen Animation Your new phone offers options for what you see on the display screen during various phone functions. To change the animation display: 1. Press > Settings > Display > Animation. 2. Select Standby, Outgoing Calls, or Service Search. (Select Set if you have selected Standby.) 3. Select an option (Preset, My Content, -Get New, or Off), and press . For Standby, you can select Time to set the animation starting time.
Changing the Contrast You can adjust your screen's contrast (brightness) to suit your surroundings. To adjust the display's contrast: 1. Press > Settings > Display > Contrast. 2. Select your desired screen contrast level and press . Your Phone’s Settings Changing the Background You can customize your phone display's appearance by selecting a color scheme to reflect your personality. To change the display's background: 1. Press > Settings > Display > Background. 2.
Changing the Display for Area Name Your phone will identify the state of the phone number you are calling to or are being called from when the number is not registered in your Contacts list. For example, a call to or from 213-555-5555 will display “California.” To set your area name display: 1. Press > Settings > Display > Match AreaCode. 2. Select On or Off. Note This feature is available only when the phone number has 10 digits, or 11 digits beginning with 1, and matches an area code.
Changing the Clock/Calendar Display for Standby Mode Select from among a variety of items to be displayed in standby mode. To set the clock/calendar display for standby mode: 1. Press > Settings > Display > Clock/Calendar. 2. Select a display option and press Your Phone’s Settings 3. Press . to apply the setting. Power Save Mode This feature helps conserve your battery power by setting the Main LCD backlight to “Dim Only,” and the Main LCD sleep mode to “after 5 sec.”. To set this feature: 1.
Changing the Text Font Size This setting allows you to adjust the display appearance when entering text (for example, when writing a message or when adding a Contacts entry) or when viewing a message. To change the text font size: 1. Press > Settings > Display > Font Size. 2. Select View or Input. View to select Messaging or Browser. Input to select Phone#s, Messaging, or Others. 3. Select a font size and press .
Location Settings Your phone is equipped with a Location feature for use in connection with location-based services that may be available in the future. The Location feature allows the network to detect your position. Turning Location off will hide your location from everyone except 911. Note Your Phone’s Settings Turning Location on will allow the network to detect your position using GPS technology, making some applications and services easier to use.
Messaging Settings Staying connected to your friends and family has never been easier. With your phone’s advanced messaging capabilities, you can send and receive many different kinds of messages. Your phone’s messaging settings make text messaging even faster and easier by letting you decide how you would like to be notified of new messages, create a signature with each sent message, and create your own preset messages, to name just a few.
Managing Preset Messages Your phone is loaded with 20 preset messages, in English and in Spanish, to help make sending text messages faster and easier. These messages, such as “Where are you?,” “Let’s get lunch,” and “Meet me at,” can be customized or deleted to suit your needs. To edit a preset message: 1. Press Your Phone’s Settings > Settings > Messaging > Preset Msgs. (The list of preset messages is displayed.) 2. Select the message you want to edit and press Options (right softkey) > Edit. 3.
Setting a Callback Number With this feature, you can notify your recipients of your callback number with a text message. To set the callback number: 1. Press > Settings > Messaging > Text > Send Callback#, and then press again. 2. Select an option from the following and press . None to send no callback number. My Phone# to send your phone number. Other to send a specific callback number. To set a number, enter a phone number and press .
Airplane Mode Airplane Mode allows you to use many of your phone’s features, such as Games and Voice Memos, when you are in an airplane or in any other area where making or receiving calls or data is prohibited. When your phone is in Airplane Mode, it cannot send or receive any calls or access online information. To set your phone to Airplane Mode: Your Phone’s Settings 1. Press > Settings > Others > Airplane Mode. (The Airplane Mode disclaimer is displayed.) 2.
TTY Use A TTY (also known as a TDD or Text Telephone) is a telecommunications device that allows people who are deaf, hard-of-hearing, or who have speech or language disabilities to communicate by telephone. Your phone is compatible with select TTY devices. Please check with the manufacturer of your TTY device to ensure that it supports digital wireless transmission. Your phone and TTY device will connect via a special cable that plugs into your phone’s headset jack.
WARNING Your Phone’s Settings 911 Emergency Calling Qwest recommends that TTY users make emergency calls by other means, including Telecommunications Relay Services (TRS), analog cellular, and landline communications. Wireless TTY calls to 911 may be corrupted when received by public safety answering points (PSAPs), rendering some communications unintelligible. The problem encountered appears related to TTY equipment or software used by PSAPs.
Display Language You can choose to display your phone’s onscreen menus in English or in Spanish. To assign a language for the phone’s display: 1. Press > Settings > Others > Language. 2. Select English or Español. Auto-Answer Mode You may set your phone to automatically pick up incoming calls when connected to an optional hands-free car kit or a headset. To set Auto-Answer mode: 1. Press > Settings > Others > Auto Answer. 2. Select an option and press .
Setting Text Entry Options To set your text entry options: 1. Press > Settings > Others > Text Entry. 2. Select an option and press Your Phone’s Settings . Auto-Capital to turn auto-capitalization on or off. My Words to add a word to or edit a word in the T9 database (see page 37). Inpt Language to select the language (English or Spanish). Default Input to select T9 Word, Alphabet, or Retain Mode for the initial entry mode.
Setting Any Key Answer This feature allows you to answer incoming calls by pressing any key (except , , softkeys, and side keys). To turn any key answer on or off: 1. Press > Settings > Others > Any Key Answer. 2. Select On or Off. Setting Navigation Key Shortcuts You can use the navigation keys as shortcuts to access specific menu items directly from standby mode. With this feature, you can reassign the default shortcuts to the menu items you choose. To set the navigation key shortcuts: 1.
Setting Abbreviated Dialing Abbreviated Dialing allows you to dial a number using the last four or five digits of the phone number. You can use either of the following options for this feature: Contacts Match to retrieve any number saved in your Contacts by entering the last three to six digits of the number. Prepend to predefine the first five- or six-digit prefix you wish to use for abbreviated dialing, so that you can dial a number by entering only the last four or five digits of the number.
Setting Headset Mode This feature allows you hands-free phone use. Press the Turbo Button (the operation button) on the headset to activate useful functions. To connect the headset: Simply plug the headset into your phone’s headset jack. To set headset mode: 1. Press > Settings > Others > Headset Mode. 2. Select On or Off. Setting the Key Guard This feature enables you to lock the keys. To turn the Key Guard on: Select Key Guard from the main menu or press and hold two seconds in the idle state.
Section 2C Setting Your Phone’s Security In This Section Accessing the Security Menu (page 66 ) Using Your Phone’s Lock Feature (page 66) Restricting Calls (page 68) Your Phone’s Security Using Special Numbers (page 69) Erasing Phone Content (page 70) Resetting the Browser (page 71) Resetting Favorites (page 71) Resetting Default Settings (page 72) Resetting Your Phone (page 72) Security Features for Data Services (page 73) Using the Parental Control Feature (page 74) By using the
Accessing the Security Menu All of your phone’s security settings are available through the Security menu. You must enter your lock code to view the Security menu. To access the Security menu: 1. Press > Settings > Security. 2. Enter your lock code to display the Security menu. Tip If you can’t recall your lock code, try using the last four digits of your wireless phone number. If this doesn’t work, call Qwest Wireless® Repair at 1-888-879-0611.
Unlocking Your Phone To unlock your phone: 1. From standby mode, press Unlock (left softkey). 2. Enter your lock code. Lock Services With this feature, you can choose to restrict access to data services, or incoming and outgoing voice calls. To activate lock services: 1. Press Your Phone’s Security > Settings > Security and then enter your lock code. (The Security Menu is displayed.) 2. Select Others > Lock Services > Voice Calls, or Data. 3. Select Locked. (Select Unlocked to deactivate this feature.
Restricting Calls There may be occasions when you want to limit the numbers your phone can call or from which it can receive calls. You can use the Restrict Calls setting to do just that. (The Restrict Calls setting does not apply to 911.) To restrict calls: 1. Press > Settings > Security, and then enter your lock code. (The Security menu is displayed.) 2. Select Others > Limit Use. 3. Select Outgoing Calls or Incoming Calls. 4. Select an option and press Note 68 .
Using Special Numbers Special numbers are important numbers that you have designated as being “always available.” You can make calls to or receive calls from special numbers even if your phone is in Lock Phone status. You can save up to three special numbers in addition to your Contacts entries. (The same number may be in both directories.) To add or replace a special number: 1. Press > Settings > Security, and then enter your lock code. (The Security menu is displayed.) 3.
Erasing Phone Content You can quickly and easily erase all the content that you have created in your phone. To erase phone content: 1. Press >Settings > Security, and then enter your lock code. (The Security menu is displayed.) 2. Select Erase/Reset, and then select an option from the following and press . EraseContacts to erase all of your Contacts entries. Erase Content to erase all items you have downloaded to your phone. Erase V. Memo to erase all voice memos saved in the phone.
Resetting the Browser This option resets your Web browser’s history, bookmarks, cookies, auto-complete text, and URLs. To reset the browser: 1. Press >Settings > Security, and then enter your lock code. (The Security menu is displayed.) 2. Select Erase/Reset > Reset Browser. 3. If you are certain you would like to reset, press OK (left softkey), and then select Yes. Your Phone’s Security Resetting Favorites This option resets all of the settings for the My Favorites list. To reset favorites: 1.
Resetting Default Settings Resetting the default settings restores all the factory defaults, including the ringer types and display settings. The Contacts, Call History, Calendar, and Messaging are not affected. To reset default settings: 1. Press >Settings > Security, and then enter your lock code. (The Security menu is displayed.) 2. Select Erase/Reset > DefaultSetting. (A disclaimer is displayed.) 3. Read the disclaimer and press OK (left softkey). 4.
Security Features for Data Services Enabling and Disabling Data Services You can disable data services without turning off your phone; however, you will not have access to all data services, including Web and messaging. Disabling data services will avoid any charges associated with data services. While signed out, you can still place or receive phone calls, check voicemail, and use other voice services. You may enable data services again at any time. To disable data services: 1.
Using the Parental Control Feature This feature allows you to restrict outgoing and incoming calls, restrict access to services such as data services, and use the Edit Contacts function. Most menu options for the Limit Use, Change Lock, and Lock Services menus in Parental Control are the same as the options for the Security menu. To restrict outgoing and incoming calls: 1. Press > Tools > Parental Ctrl. 2. Enter your lock code to display the Parental Control menu. 3.
To add or replace a special number: 1. Press > Tools > Parental Ctrl. 2. Enter your lock code to display the Parental Control menu. 3. Select Special #s. 4. Select a field for your entry and press 5. Enter the number and press . . To edit Contacts: 1. Press Your Phone’s Security You can also edit Contacts from the Parental Control menu while any Limit Use feature (except Allow All) is enabled. You are required to enter your lock code once to access the Parental Control menu.
Section 2D Controlling Your Roaming Experience In This Section Understanding Roaming (page 77) Setting Your Phone’s Roam Mode (page 78) Using Call Guard (page 79) Using Data Guard (page 80) Roaming is the ability to make or receive calls when you’re off the home network. Your new S1 by SANYO works anywhere on the home network and allows you to roam on 1900 and 800 MHz digital networks. This section explains how roaming works as well as special features that let you manage your roaming experience.
Understanding Roaming Recognizing the Roaming Icon on the Display Screen Your phone’s display screen always lets you know when you’re off the home network. Any time you are roaming, the phone displays the roaming icon ( ). Tip Remember, when you are using your phone off the home network, always dial numbers using 11 digits (1 + area code + number).
Setting Your Phone’s Roam Mode Your phone allows you to control your roaming capabilities. By using the Roaming menu option, you can determine which signals your phone accepts. Set Mode Choose from three different settings on your phone to control your roaming experience. To set your phone’s roam mode: 1. Press > Settings > Roaming > Set Mode. 2. Select an option and press 78 . Qwest Only to access the home network only and prevent roaming on other networks.
Using Call Guard Your phone has two ways of alerting you when you are roaming off the home network: the onscreen roaming icon and Call Guard. Call Guard makes it easy to manage your roaming charges by requiring an extra step before you can place or answer a roaming call. (This additional step is not required when you make or receive calls while on the home network.) Note Call Guard is turned on by default on your phone. To turn Call Guard on or off: 1. Press > Settings > Roaming > Call Guard. 2.
Using Data Guard Depending on service availability and roaming agreements, your phone may be able to access data services while roaming on certain digital systems. You can set your phone to alert you when you are roaming off the home network and try to use data services such as messaging. Note Data Guard is turned off by default on your phone. To set the Data Guard notification: 1. Press > Settings > Roaming > Data Guard. 2. Select an option and press .
Section 2E Managing Call History In This Section Viewing History (page 82) Call History Options (page 83) Making a Call From Call History (page 84) Saving a Phone Number From Call History (page 84) Prepending a Phone Number From Call History (page 85) Erasing Call History (page 85) Section 2E: Managing Call History Call History The Call History keeps track of incoming calls, outgoing calls, missed calls, and recent calls.
Viewing History You’ll find the Call History feature very helpful. It is a list of the last 20 phone numbers (or Contacts entries) for calls you placed, accepted, or missed. Call History makes redialing a number fast and easy. It is continually updated as new numbers are added to the beginning of the list and the oldest entries are removed from the bottom of the list. Each entry contains the phone number (if it is available) and Contacts entry name (if the phone number is in your Contacts).
Call History Options For additional information and options on a particular call, highlight a Call History entry and press . This feature displays the date and time of the call, the phone number (if available), and the caller’s name (if the number is already in your Contacts). By pressing Options (right softkey), you can choose from the following options: Call to dial the phone number. Call:Speaker On to dial the phone number in speakerphone mode. Send Text to send a Text message.
Making a Call From Call History To place a call from Call History: 1. Press > Call History, and then select Outgoing, Incoming, Missed, or Recent Calls. 2. Use your navigation key to select a Call History entry and press . Saving a Phone Number From Call History Your phone can store up to 500 phone numbers in up to 200 Contacts entries. (An entry may contain up to seven numbers.) To save a phone number from Call History: 1.
Prepending a Phone Number From Call History If you need to make a call from Call History and you happen to be outside your local area code, you can add the appropriate prefix by prepending the number. To prepend a phone number from Call History: 1. Select a Call History entry and press Options (right softkey). 2. Select Prepend. 3. Enter the prefix and press to call the number. Erasing Call History To erase individual Call History entries, see “Call History Options” on page 83. To erase Call History: 1.
Section 2F Using Contacts In This Section Adding a New Contacts Entry (page 87) Assigning a Group Entry (page 88) Finding Contacts Entries (page 89) Editing a Contacts Entry (page 90) Contacts Entry Options (page 91) Assigning Speed Dial Numbers (page 92) Erasing a Contacts Entry From the List (page 92) Assigning an Image to a Contacts Entry (page 93) Assigning a Ringer Type to an Entry (page 93) Secret Contacts Entries (page 94) Now that you know the basics that make it easier to stay
Adding a New Contacts Entry Your phone can store up to 500 phone numbers in up to 200 Contacts entries. (An entry may contain up to seven numbers.) Each entry’s name can contain 32 characters. To add a new entry: 1. Press > Contacts > Find/Add Entry > Add Contact. 2. Enter the Contacts name and press the navigation key down. 3. Enter the phone number for the entry and press . 4. Select a label for the entry (Mobile, Home, Work, Pager, Fax, or Other) and press . 5. Press Save (left softkey).
Assigning a Group Entry Your phone can create up to 20 separate group entries. By assigning Contacts entry to a group, you can search easily using a user-defined group name. To assign a Contact entry to a group: 1. Press > Contacts > Group. 2. Select an available group entry location and press Options (right softkey) > Add Members. 3. Select a contact and press . 4. Press Add (left softkey) when you have finished selecting members. To edit a group entry: 1. Press > Contacts > Group. 2.
Finding Contacts Entries There are several ways to display your Contacts entries: by name, by speed dial number, and by group. Follow the steps outlined in the sections below to display entries from the Contacts menu. Finding Names To find Contacts entries by name: 1. Press > Contacts > Find/Add Entry. 2. Scroll through all the entries using the navigation key. – or – Enter the first letter of the name. (The more letters you enter, the more your search narrows.) 3.
Finding Group Entries To find entries designated as part of a group: 1. Press > Contacts > Group. 2. Scroll through the group entries using your navigation key. To display Contacts entries belonging to a group, highlight the group and press . 3. To dial the entry’s default phone number, select the entry and press . Editing a Contacts Entry To make changes to an entry: 1. Press > Contacts > Find/Add Entry. 2. Scroll to the entry you wish to edit and press . 3.
Contacts Entry Options To access a Contacts entry’s options, display the Contacts list, highlight an entry and press . Then select a phone number and press Options (right softkey). To select an option, highlight it and press . Edit to edit the selected entry. Call to dial the selected number. Call:Speaker On to dial the phone number in speakerphone mode. Send Text to send a Text message. Call Alarm to set a call alarm for the entry. (See page 99 for Call Alarm.
Assigning Speed Dial Numbers With this feature you can dial Contacts directory entries with one keypress for locations 2–9. For details on how to make calls using speed dial numbers, see “Using Speed Dialing” on page 34. To assign a speed dial number to a selected Contacts entry: 1. Press > Contacts > Speed Dial #s. 2. Select an available speed dial location and press 3. Select an entry from the list and press . . 4. Select the phone number you want to set as a speed dial number and press .
Assigning an Image to a Contacts Entry You can assign an image to a Contacts entry. The image is displayed when the entry calls you. To assign an image for an entry: 1. Select the entry for which you want to assign the image and press 2. Press the navigation key up to highlight the 3. Select an image and press icon and press . . . 4. Press Save (left softkey) to save the image type.
Secret Contacts Entries You can hide an entry’s phone number(s) and require your lock code to edit the entry by making it secret. The entry name is still displayed, but all other information is replaced with “.” To make an entry secret: 1. Press > Contacts > Find/Add Entry. 2. Select the Contacts entry you want to tag as secret and press Options (right softkey). 3. Select Set Secret. 4. Enter the four-digit lock code. 5. Select On. To make an entry public: 1. Press > Contacts > Find/Add Entry.
Calendar & Tools Section 2G Using the Phone’s Calendar and Tools In This Section Using Your Phone’s Calendar (page 96) Using Your Phone’s Tools (page 101) Personal Information Management (page 105) Your phone is equipped with several personal information management features that help you manage your busy lifestyle. This section shows you how to use these features to turn your phone into a time management planner that helps you keep up with your contacts, schedules, and commitments.
Using Your Phone’s Calendar Displaying Your Calendar To display your calendar: Press > Tools > Calendar. Adding an Event to the Calendar Your Calendar helps organize your time and reminds you of important events (up to 100 events). To add an event: 1. Press > Tools > Calendar and select the day to which you wish to add an event. 2. Press Options (right softkey) > Add Event > Schedule. 3. Select any of the following items and press .
Calendar & Tools Event Alerts There are several ways your phone alerts you to scheduled events: By playing the assigned ringer type. By illuminating the backlight. By flashing the LED. Event Alert Menu When your phone is turned on and you have an event alarm scheduled, your phone alerts you and displays the event summary. To silence the alarm: Press any key to stop the alarm. (The alarm will stop and then sound again after the selected snooze interval.
Viewing Events To view your scheduled events: 1. Press > Tools > Calendar. 2. Using your navigation key, highlight the day for which you would like to view events and press . (If you have events scheduled for the selected day, they will be listed in chronological order). 3. To display the details of an event listed in the schedule, highlight the event and press . Erasing a Day’s Events To erase a day’s scheduled events: 1.
Calendar & Tools Adding a Call Alarm to the Calendar You can set call alarms to notify you when you need to place a call. The call alarm will let you know when and to whom to place a scheduled call. You can set up to 15 call alarms. To add a call alarm to the calendar: 1. Press > Tools > Calendar and select the day to which you want to add a call alarm. 2. Press Options (right softkey) > Add Event > Call Alarm. 3.
Adding To Do List Items Your phone can store and manage up to 20 To Do List items. To add an item to your To Do List: 1. Press > Tools > Calendar > Options (right softkey). 2. Select To Do List > Options (right softkey) > Add Item. 3. Enter the description (up to 14 characters) and press . 4. Select Priority to edit the To Do’s priority. (Normal, Urgent, or Done.) 5. Press Save (left softkey) to save the To Do items.
In addition to helping you be more efficient and organized, your phone offers useful and entertaining tools. Using the Alarm Clock Calendar & Tools Using Your Phone’s Tools Your phone comes with a built-in alarm clock that has multiple alarm capabilities. To use the alarm clock: 1. Press > Tools > Alarm Clock. 2. Select a number and press . 3. Select the items you want to edit and press . Description to enter a description of the alarm (up to 14 characters). Time to enter the alarm time.
Using the Stopwatch To start the stopwatch: Press > Tools > Stopwatch. Press Start (left softkey) to start the stopwatch. Press Stop (left softkey) to stop the stopwatch. Press Resume (left softkey) to restart the stopwatch. To record a lap time while the stopwatch is running: Press Lap (right softkey) to record time of the first lap. Press Lap (right softkey) again to record the next lap times. (You can record up to five lap times.) To display the stopwatch options: 1.
Your phone comes with a built-in calculator. To use the calculator: 1. Press > Tools > Calculator. 2. Enter numbers using your keypad. Calendar & Tools Using the Calculator 3. Press the appropriate navigation key to perform a calculation (Up for addition, Down for subtraction, Left for multiplication, Right for division). Press the left softkey to insert a decimal point. 4. Enter numbers and press for the result. To clear the numbers, press CLR (right softkey).
World Clock This feature is available only in digital service areas. To view the time in different locations: 1. Press > Tools > World Clock. 2. Press the navigation key left or right to scroll through different time zones. Tip 104 Press Summer (left softkey) or Standard (right softkey) to select between daylight saving and standard time (if applicable).
Calendar & Tools Personal Information Management Displaying Your User Address To display the phone’s current user address: Press > Settings > Phone Info > Phone#/UserID. Finding Icon Definitions To view an explanation of icons that appear on the display: 1. Press > Settings > Phone Info > Icon Glossary. 2. Select the item for which you want to see the explanation and press . (The icon’s explanation appears.
Section 2H Using Your Phone’s Voice Services In This Section Using Voice-Activated Dialing (page 107) Managing Voice Memos (page 109) Setting Up Screen Call (page 111) Your phone’s Voice Services let you place calls using your voice, store voice reminders, and record memos right on your phone. This section includes easy-to-follow instructions for using voice-activated dialing and managing voice memos.
Using Voice-Activated Dialing Note Please set the Voice Prompt feature (see page 43) to On before using Voice-Activated Dialing so that you can hear the voice instruction from the phone. The default setting is On. Voice Services With Voice-Activated Dialing, you can use a voice dial tag to automatically dial a phone number in your Contacts. (A voice dial tag is a command you record and use to place calls without using the keypad.) Your phone can store up to 30 voice dial tags.
Programming Voice Dial Tags To program a voice dial tag: 1. Press > Tools > Voice Services > Voice Tag > Program. 2. You will be prompted to say the name you want to program. Say the name after the beep. 3. Respond to the prompt by repeating the name after the beep. 4. Select the voice dial entry (name) in the Contacts list and press 5. Select your desired phone number and press . . (The display shows “Voice Tag Recorded.”) Tip Record voice dial tags in a quiet environment.
Managing Voice Memos You can use your phone’s Voice Services to record brief memos to remind you of important events, phone numbers, or grocery list items. To record a voice memo: 1. Press > Tools > Voice Services > Voice Memo > Record. 2. Start recording after the beep. 3. To end the recording, press Note , or Voice Services Recording Voice Memos . Your phone can store up to 12 memos, and the total available recording time is 72 seconds (maximum of 18 seconds per memo).
Voice Memo Options There are several user options available for managing voice memos. To display the voice memo options: 1. Press > Tools > Voice Services > Voice Memo > Play. 2. Select a voice memo or All, and press Options (right softkey). 3. Select an option and press 110 . Speaker On or Speaker Off to activate or deactivate the speakerphone mode. Erase or Erase All to erase an individual memo or all voice memos.
Setting Up Screen Call This feature enables you to screen incoming calls by using a recorded announcement, either one that is prerecorded or one that you record. You can also record the caller’s message into the Voice Memo list. To start Screen Call when you have incoming calls: When the phone rings or vibrates, press Options (right softkey) > Screen Call. Voice Services Activating Screen Call To set Auto Screen Call: 1. Press > Tools > Voice Services > Screen Call > Auto. 2.
Recording Your Name for a Prerecorded Announcement You can use a prerecorded announcement with or without your name. If you record your name, your phone adds your name to the prerecorded message to announce that you are not available to answer calls. To record your name: 1. Press > Tools > Voice Services > Screen Call > Announcement. 2. Select Pre-Recorded and press Edit (right softkey) > Record Name. 3. Press to start the first recording. (Press to stop recording.
Reviewing an Announcement To review an announcement: 1. Press > Tools > Voice Services > Screen Call > Announcement. 3. Select Play or Play:Speaker. Erasing an Announcement Voice Services 2. Select Pre-Recorded or Custom and press Edit (right softkey). To erase an announcement: 1. Press > Tools > Voice Services > Screen Call > Announcement. 2. Select Pre-Recorded or Custom, and press Edit (right softkey). 3. Select Erase Name or Erase. (A confirmation will be displayed.) 4. Select Yes.
Section 2I Using Bluetooth® In This Section Turning Bluetooth On and Off (page 115) Using the Bluetooth Settings Menu (page 116) Bluetooth Profiles (page 119) Pairing Bluetooth Devices (page 120) Using the Trusted Devices Options (page 121) Sending Data via Bluetooth (page 122) Your phone features built-in Bluetooth technology, allowing you to share information more easily than ever before.
Turning Bluetooth On and Off By default, your phone’s Bluetooth feature is turned off. Turning Bluetooth on makes your phone “available” to other in-range Bluetooth devices. To make your phone visible to other devices you must also set your phone’s visibility to other than Hidden. (See page 117.) To turn Bluetooth on: 1. Press > Settings > Bluetooth > Enable/Disable. To turn Bluetooth off: 1. Press > Settings > Bluetooth > Enable/Disable. 2. Select Disable to disable Bluetooth.
Using the Bluetooth Settings Menu The Bluetooth settings menu allows you to set up many of the characteristics of your phone’s Bluetooth service, including: Entering or changing the name your phone uses for Bluetooth communication. Setting your phone’s visibility (or “discoverability”) to other Bluetooth devices. Choosing a device for your Bluetooth calls. Displaying your phone’s Bluetooth address. To access the Bluetooth settings menu: 1. Press > Settings > Bluetooth. 2.
Bluetooth Settings: Visibility The Visibility section of the Bluetooth settings menu allows you to manage your availability to other Bluetooth devices. To configure your phone’s visibility (discoverability) to other Bluetooth devices: 1. Press > Settings > Bluetooth > Visibility. 2. Select a Visibility setting and press Note : Always Visible to allow other Bluetooth devices to detect and identify your phone. Visible 3 min.
Bluetooth Settings: Device Information To display your phone’s device information: Press > Settings > Bluetooth > Device Info. Setting Auto-Accept You can configure your phone’s accessibility to other Bluetooth devices. To configure your phone’s accessibility to other Bluetooth devices: 1. Press > Tools > Bluetooth. 2. Select the device from the trusted devices list and press Options (right softkey) > Auto-Accept. 3.
Bluetooth Profiles All the Bluetooth settings you configure are stored in your phone’s Bluetooth user profile. Different profiles can be used for specific Bluetooth functions. Headset Profile – This profile functions as a wireless ear jack. When an incoming call is received, the ringer can be heard through the headset instead of through the phone. The call can then be received by pushing a button.
Pairing Bluetooth Devices Paired Devices The Bluetooth pairing process allows you to establish trusted connections between your phone and another Bluetooth device. When devices are paired, a passcode (sometimes called a PIN) is shared between devices, allowing for fast, secure connections while bypassing the discovery and authentication process. Note If Bluetooth is not enabled on your phone, you will be asked to enable it before you can proceed with the pairing process.
Using the Trusted Devices Options Once you have created paired devices, several options are available from the trusted devices list. To use the trusted devices options: 1. From the trusted devices list, select a device. 2. Press Options (right softkey) to display the following options: Connect or Disconnect to connect to or disconnect from the Bluetooth device (if applicable). Send Item to send an item saved on your phone to another Bluetooth device.
Sending Data via Bluetooth You can send data saved on your phone to another Bluetooth device. To send data via Bluetooth: 1. Press > Tools > Bluetooth. 2. Select the device from the trusted devices list and then press Options (right softkey) > Send Item. 3. Select an item (Business Card or Contacts) and press . 4. Follow the onscreen instructions to select the item(s) to send. 5. Make sure the other device is ready to receive data, and then press Send (left softkey). 6.
Section 3 Qwest® Service Features
Section 3A Qwest® Service Features: The Basics In This Section Using Voicemail (page 125) Using SMS Text Messaging (page 132) Making a Three-Way Call (page 135) Using Caller ID (page 136) Responding to Call Waiting (page 136) Using Call Forwarding (page 137) Now that you’ve mastered your phone’s fundamentals, it’s time to explore the calling features that enhance your wireless service. This section outlines your basic Qwest service features.
Setting Up Your Voicemail All unanswered calls to your phone are automatically transferred to your voicemail, even if your phone is in use or turned off. Therefore, you will want to set up your voicemail and personal greeting as soon as you receive your phone. Qwest Service Using Voicemail To set up your voicemail: 1. Press and hold . 2. Follow the system prompts to: Note Create your passcode. Record your name announcement. Record your greeting.
Voicemail Notification There are several ways your phone alerts you to a new message: By displaying a message on the screen. By sounding the assigned ringer type. By the LED blinking red. By displaying at the top of your screen. New Voicemail Message Alerts When you receive a new voice message, your phone alerts you and prompts you to call your voicemail. To call your voicemail: Note Press .
Retrieving Your Voicemail Messages Using One-Touch Message Access Press and hold Qwest Service You can review your messages directly from your wireless phone or from any other touch-tone phone. To dial from your wireless phone, you can either speed dial your voicemail or use the menu keys. . (Your phone will dial your voicemail box.) Using the Menu Keys on Your Phone to Access Your Messages 1. Press > Messaging > Voicemail. 2. Select Call Voicemail to listen to your messages.
Voicemail Key Guide Here’s a quick guide to your keypad functions while listening to voicemail messages. For further details and menu options, see “Voicemail Menu Key” on page 131. Date/Time Send Reply Advance Replay Rewind Forward Erase Call Back Save Cancel Help Skip Voicemail Options Your phone offers several options for organizing and accessing your voicemail.
Setting Up Group Distribution Lists 1. Press and hold to access your voicemail. (If your voicemail box contains any new messages, press to access the main voicemail menu.) 2. Press Qwest Service Create up to 20 separate group lists, each with up to 20 entries. to change your Personal Options, following the system prompts. 3. Press for Settings. 4. Press for Group Distribution Lists. 5. Follow the voice prompts to review, create, edit, rename, or delete group lists.
Voicemail-to-Voicemail Message Forwarding Forward a voice message, except those marked “Private,” to other voicemail users. 1. After listening to a message, press . 2. Follow the voice prompts to enter the phone number. 3. Follow the voice prompts to record your introduction and forward the voice message. Voicemail-to-Voicemail Receipt Request Receive confirmation that your voice message has been listened to when you send or forward messages to or reply to messages from other voicemail users. 1.
Clearing the Message Icon To clear the icon from the display screen: 1. Press > Messaging > Voicemail > Clear Count. Qwest Service Your phone may temporarily continue to display the message icon after you have checked your voice and text messages. 2. Select Yes. Voicemail Menu Key Following the prompts on the voicemail system, you can use your keypad to navigate through the voicemail menu. The following list outlines your phone’s voicemail menu structure.
Greetings Main Greetings Recorded Name Create an Extended Absence Greeting Return to Personal Options Menu Expert Mode (On/Off) Place a Call Disconnect Using SMS Text Messaging With SMS Text Messaging, you can use other people’s phone numbers to send instant text messages from your phone to their messaging-ready phones – and they can send messages to you. In addition, SMS Text Messaging includes a variety of preset messages, such as “Can’t talk right now. Send me a message.
2. Press 3. Press Next (left softkey) when you have finished selecting and entering recipients. 4. Compose a message (up to 160 characters) or use the preset Qwest Service to save the recipient. (You may include up to 25 recipients per message.) messages, smileys, or emoticons and press OK (left softkey). To type a message, use your keypad to enter your message. Press Mode (right softkey) to select a character input mode. (See “Entering Text” on page 35.) 5.
To reply to an SMS Text message: 1. While the message is open, press Reply (left softkey). – or – Highlight the message in Inbox, and press Reply (left softkey). 2. Compose your reply or use the preset messages or icons and press OK (left softkey). To type a message, use your keypad to enter your message. Use Mode (right softkey) to select a character input mode. 3. Review your reply and press Send (left softkey).
With Three-Way Calling, you can talk to two people at the same time. When using this feature, the normal airtime rates will be charged for each of the two calls. Qwest Service Making a Three-Way Call To make a Three-Way Call: 1. Enter a number you wish to call and press . 2. Once you have established the connection, press . (This puts the first caller on hold.) 3. Dial the second number you wish to call and press . 4.
Using Caller ID Caller ID allows people to identify a caller before answering the phone by displaying the number of the incoming call. If you do not want your number displayed when you make a call, just follow these easy steps. To block your phone number from being displayed for a specific outgoing call: 1. Press . 2. Enter the number you want to call. 3. Press . To permanently block your number, call Qwest Wireless® Repair at 1-888-879-0611.
Call Forwarding lets you forward all your incoming calls to another phone number – even when your phone is turned off. You can continue to make calls from your phone when Call Forwarding is activated. Qwest Service Using Call Forwarding To activate Call Forwarding: 1. Press . 2. Enter the area code and phone number to which calls should be forwarded. 3. Press . (You will hear a tone to confirm the activation of Call Forwarding.) To deactivate Call Forwarding: 1. Press 2. Press Note . .
Section 3B Data Services In This Section Data Services Applications (page 139) Getting Started With Data Services (page 139) Accessing Messaging (page 145 ) Downloading Content (page 148) Exploring the Web (page 150) Data services offer easy and amazing features you will really use. These features – including messaging, games, downloadable ringers and screen savers, and portable Web access – let you have fun, stay in touch, and stay informed no matter where you go on the network.
Data Services Applications Here is a brief list of the applications available through your phone. For more information, please visit us online at www.qwest.com. Games – Play exciting games with full-color graphics, sound, and vibration. Choose from hundreds of games to play anytime. Ringers – Personalize your phone by downloading and assigning different ringers to numbers in your Contacts. Data Services Messaging – Send and receive email messages and chat on your phone.
When you use data services, your user name is submitted to identify you to the network. The user name is also useful as an address for email, as a way to personalize Web services, and as an online virtual identity. Your user name will be automatically programmed into your phone. You don’t have to enter it. Updating Your User Name When you change the programmed user name and select a new one, you can update your user name through your phone.
Launching a Data Connection To launch a data connection: If Net Guard is enabled and displayed (see below), press OK (left softkey) to continue and access the Web. While connecting, an animation will be displayed on the screen. Data Services Note Press > Web. (Your connection will start and the home page will be displayed.) If you had a previous connection, you may not see the animation when you start the session again.
Data Connection Status and Indicators Your phone’s display lets you know the current status of your data connection through indicators which are displayed at the top of the screen. The following symbols are used: Your data connection is active (data is being transferred); the transmit/receive symbol will blink to indicate data transmission. Incoming voice calls go directly to voicemail; outgoing voice calls can be made, but the data connection will terminate.
Navigating the Web Navigating through menus and Web sites during a data session is easy once you’ve learned a few basics. Here are some tips for getting around: Softkeys Data Services During a data session, the bottom line of your phone’s display contains one or more softkeys. Softkeys are shortcut controls for navigating around the Web, and they correspond to the keys directly below the phone’s display screen.
Selecting Once you’ve learned how to use softkeys and scroll, you can start navigating the Web. To select onscreen items: Tips Use the navigation key to highlight an item, and then press a softkey (or press ). You’ll find that the left softkey is used primarily for selecting items. This softkey is often labeled “Go.” If the items on a page are numbered, you can use your keypad (number keys) to select an item.
Accessing Messaging Note For complete details on text messaging, see “Using SMS Text Messaging” on page 132. Message Types Data Services You can send and receive emails and text messages right from your phone. Messaging allows you to stay connected to friends, family, and coworkers 24 hours a day anywhere on the home network. There are many types of text messaging available on your phone. These include SMS Text Messaging, Instant Messaging, Email, and Chat.
Viewing Sprint Picture Mail When a new Sprint Picture Mail message arrives, you will see the icon on your display screen. You can view picture messages from the message notification screen or from the Messaging menu. To view a new Sprint Picture Mail message from the notification screen: Press View (left softkey). To view Sprint Picture Mail messages from the main menu: 1. Press > Messaging > Pic. Mail. (The Sprint Picture Mail list appears.) 2. Select your desired picture message and press . 3.
Accessing Instant Messaging Data services also provide you with access to popular instant messaging (IM) clients, including AOL® Instant MessengerTM and Yahoo!® Messenger. To access instant messaging clients from your phone: > Messaging > IM & Email > Instant Msg. 2. Select an instant messaging provider, such as AOL Instant Messenger or Yahoo! Messenger. 3. Use your keypad to enter the required sign-in information for the Data Services 1.
Downloading Content With data services, you have access to a dynamic variety of content, such as downloadable Games, Ringers, Screen Savers, and other applications. (Additional charges may apply.) The basic steps required to access and download content are outlined below. Accessing the My Content Menus To access the download menus: 1. Press > My Content. 2. Select the type of file or service (Games, Ringers, ScreenSavers, Applications, or IM & Email). 3. Select Get New (if applicable).
Downloading an Item To download a selected item: 1. From the information page, select Buy. (The item will download Data Services Once you’ve selected an item you wish to download, highlight it and press , or press Go (left softkey). You will see a summary page for the item including its title, the vendor, the download details, the file size, and the cost.
Exploring the Web With Web access on your phone, you can browse full-color graphic versions of your favorite Web sites, making it easier than ever to stay informed while on the go. Follow sports scores, breaking news and weather, and shop on your phone anywhere on the home network.
Options available under the browser menu include: Home. Returns the browser to the home page. Forward. Allows you to go forward to the pages you have visited. Mark this page. Allows you to create new bookmarks. View Bookmarks. Allows you to view and access bookmarked sites. Search. Launches a Web search. Send page. Allows you to send the URL you’re viewing through SMS Text Messaging. Go to URL.... Allows you to navigate directly to a Web site by entering its URL. History.
Creating a Bookmark Bookmarks allow you to store the addresses of your favorite Web sites for easy access at a later time. To create a bookmark: 1. Go to the Web page you want to mark. 2. Press the right softkey to open the browser menu. 3. Select Mark this page and press . 4. Press OK (left softkey) to save the bookmark. Note Bookmarking a page does not store the page’s contents, just its address. Some pages cannot be bookmarked. Whether a particular Web page may be marked is controlled by its creator.
Deleting a Bookmark To delete a bookmark: 1. Press the right softkey to open the browser menu. 2. Select View Bookmarks > OK (left softkey). right softkey. 4. Select Delete. (A confirmation screen will be displayed.) Data Services 3. Scroll to highlight the bookmark you’d like to delete and press the 5. Press Yes (right softkey) to remove the bookmark. Going to a Specific Web site To go to a particular Web site by entering a URL (Web site address): 1.
Sending a Web Page This feature allows you to send a URL (Web site address) you’re viewing through SMS Text Messaging. To send a Web page: 1. From an active data connection, press the right softkey to display the browser menu. 2. Select Send page > OK (left softkey). 3. To complete and send a Web Page, follow steps 2–6 in “Composing SMS Text Messages” on page 132.
Section 4 Safety and Warranty Information
Section 4A Important Safety Information In This Section General Precautions (page 157) Maintaining Safe Use of and Access to Your Phone (page 158) Caring for the Battery (page 160) Radio Frequency (RF) Energy (page 161) Owner’s Record (page 164) Phone Guide Proprietary Notice (page 164) This phone guide contains important operational and safety information that will help you safely use your phone.
General Precautions There are several simple guidelines to operating your phone properly and maintaining safe, satisfactory service. To maximize performance, do not touch the bottom portion of your phone where the internal antenna is located while using the phone. Speak directly into the mouthpiece. Avoid exposing your phone and accessories to rain or liquid spills. If your phone does get wet, immediately turn the power off and remove the battery.
Maintaining Safe Use of and Access to Your Phone Do Not Rely on Your Phone for Emergency Calls Mobile phones operate using radio signals, which cannot guarantee connection in all conditions. Therefore you should never rely solely upon any mobile phone for essential communication (e.g., medical emergencies). Emergency calls may not be possible on all cellular networks or when certain network services or mobile phone features are in use. Check with your local service provider for details.
Turning Off Your Phone Before Flying Turn off your phone before boarding any aircraft. To prevent possible interference with aircraft systems, the U.S. Federal Aviation Administration (FAA) regulations require you to have permission from a crew member to use your phone while the plane is on the ground. To prevent any risk of interference, FCC regulations prohibit using your phone while the plane is in the air.
Caring for the Battery Protecting Your Battery The guidelines listed below help you get the most out of your battery’s performance. Recently there have been some public reports of wireless phone batteries overheating, catching fire or exploding. It appears that many, if not all, of these reports involve counterfeit or inexpensive, aftermarket-brand batteries with unknown or questionable manufacturing standards.
Radio Frequency (RF) Energy Understanding How Your Phone Operates Your phone is basically a radio transmitter and receiver. When it’s turned on, it receives and transmits radio frequency (RF) signals. When you use your phone, the system handling your call controls the power level. This power can range from 0.006 watt to 0.2 watt in digital mode. Knowing Radio Frequency Safety The design of your phone complies with updated NCRP standards described below.
Specific Absorption Rates (SAR) for Wireless Phones The SAR is a value that corresponds to the relative amount of RF energy absorbed in the head of a user of a wireless handset. The SAR value of a phone is the result of an extensive testing, measuring and calculation process. It does not represent how much RF the phone emits. All phone models are tested at their highest value in strict laboratory settings.
FCC Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Owner’s Record The model number, regulatory number, and serial number are located on a nameplate inside the battery compartment. Record the serial number in the space provided below. This will be helpful if you need to contact us about your phone in the future. Model: S1 by SANYO® Serial No.
Section 4B Manufacturer’s Warranty In This Section Manufacturer’s Warranty (page 166) Your phone has been designed to provide you with reliable, worry-free service. If for any reason you have a problem with your equipment, please refer to the manufacturer’s warranty in this section. For information regarding the terms and conditions of service for your phone, please visit www.qwest.com or call Qwest Wireless® Repair at 1-888-879-0611.
Manufacturer’s Warranty Manufacturer’s Limited Warranty SANYO FISHER COMPANY (“SANYO”) offers you, the original purchaser who has purchased the enclosed subscriber unit (“Product”) only from an authorized dealer in the United States, a limited warranty that the Product, including accessories in the Product’s package, will be free from defects in material or workmanship as follows: A.
This limited warranty does not cover and is void with respect to the following: (i) Products which have been improperly installed, repaired, maintained or modified (including the antenna); (ii) Products which have been subjected to misuse (including Products used in conjunction with hardware electrically or mechanically incompatible or Products used with software, accessories, goods or ancillary or peripheral equipment not supplied or expressly authorized by SANYO for use), abuse, accident, physical damage,
Some States do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This limited warranty gives you specific legal rights, and you may have other rights which vary from State to State. To obtain warranty service, contact SANYO Fisher Company Attention : Customer Services for Wireless Products Phone : 866-SANYOWC (866-726-9692) Web : http://www.sanyowireless.
Index A Abbreviated Dialing 63 Airplane Mode 57 Alarm Clock 101 Alert Notification 46 Answering Calls 25 Any Key Answer 62 AOL Instant Messenger 147 Area Name Display 50 Auto Key Guard 64 Auto-Answer Mode 60 C Calculator 103 Calendar 96-100 Adding an Event 96 Call Alarm 99 Displaying 96 Erasing Events 98 Event Alerts 97 Viewing Events 98 Call Alarm 99 Call Forwarding 137 Call Guard 79 Call History 81-85 Erasing 85 Making a Call From 84 Options 83 Prepending a Phone Number From 85 Saving a Phone Number From
Group Entries 88 Options 91 Ringer Type 93 Secret Entries 94 Contacts Match 63 Contrast 49 D Data Guard 80 Data Services 138-154 Applications 139 Downloading Content 148 Enabling and Disabling 73 Launching 141 Messaging 145-147 Net Guard 141 Password 6 Status and Indicators 142 User Name 139 Dialing Options 24 Directory Assistance 7 Display Screen Animation 48 Display Settings 47-52 Downloading Content 148-149 E Email 145 Emergency Numbers 27 End-of-Call Options 30 Enhanced 911 (E911) 28 Entering Text 35-39
P Parental Control 74-75 Pauses 32 Personal Information Management 105 Phone Display Screen 13 Features List 15 Holding 22 Illustration 11 Key Functions 11 Resetting 72 Setting Up 3 Turning On and Off 16 Updating 103 Phone Number Displaying 21 Finding 32 Saving 31 With Pauses 32 Power Save Mode 51 Preset Messages 55, 134 R Radio Frequency (RF) Energy 161 Resetting Your Phone 72 Restricting Calls 68 S Safety Information 156-164 Screen Call 111-113 Screen Saver 50 Security 65-75 Calling in Lock Mode 67 Chan
T T9 Text Input 36-38 Adding a Word 37 Settings 38 Text Entry See Entering Text Three-Way Calling 135 Time, Setting 61 To Do List 100 Tone Length 43 TTY Use 58 Turning Your Phone Off 17 Turning Your Phone On 16 V Vibrate Type 42 Voice Dial Tags 108 Voice Memos 109-110 Options 110 Recording 109 Reviewing 109 Voice Prompt 43 Voice-Activated Dialing 107-108 Voicemail 5, 125-132 Checking While Roaming 77 Clearing the Icon 131 Menu Key 131 Notification 126 Options 128 Retrieving 127 Setting Up 5, 125 Volume Sett
Notes ___________________________________________________ ___________________________________________________ ___________________________________________________ ___________________________________________________ ___________________________________________________ ___________________________________________________ ___________________________________________________ ___________________________________________________ ___________________________________________________ ______________________________________
