Specifications

5
Getting started
Power guard/spare battery charger feature
Your phone can use the spare battery in the base unit to provide operational backup in the event of a
power failure. With a fully charged battery in the spare battery charger, you will still be able to place
and receive calls from the handset for up to 1.5 hours.
The spare battery can also be used to replace a drained handset battery, ensuring uninterrupted use.
A spare battery can be purchased from most retail stores that carry electronic equipment.
1. Open the spare battery compartment by pressing the lever on the cover as shown below in diagram
one. Then pull the compartment cover up, as shown in diagram two.
2. Align the two holes in the plug with the socket pins, then snap the plug into place. Place the battery
in the charger as shown in the diagram below.
3. Replace the spare battery compartment cover. The spare battery takes 16 hours to fully charge a
drained battery.
Installation
• When using the phone
during power backup
mode, audio
quality may be
compromised
due to reduced
power availability.
CAUTION: To reduce
the risk of re or injury,
read and follow these
instructions:
1. Use only the
battery supplied, or
equivalent.
2. Do not open or
mutilate the battery.
Released electrolyte
is corrosive and may
cause damage to the
eyes or skin. It may be
toxic if swallowed.
3. Exercise care in
handling battery
in order not to
short the battery
with conducting
materials such as
rings, bracelets, and
keys. The battery
or conductor may
overheat and cause
burns.