Operating instructions

68
If the Following Appear …
If the unit detects a problem, one of the following messages will be
displayed on the display.
The battery needs to be charged. Place the
handset on the base unit to charge the battery
(p. 11).
You are too far from the base unit. Move closer
and try again.
If “SEARCHING FOR BASE” is still displayed,
place the handset on the base unit and unplug
the AC adaptor to reset. Plug in, and try again.
Or, re-install the handset battery and place the
handset on the base unit (p. 65). Try again.
The AC adaptor is unplugged. Plug in (p. 10).
The telephone line is unplugged. Plug in (p. 10).
The handset has not been registered. Register
the handset (p. 54).
The Caller List is empty.
There are no stored items in the phonebook.
CALLS LOG
IS EMPTY
RDL MEMMENU
LOW
BATTERY
RDL MEM
MENU
SEARCHING
FOR BASE
NEW MENU
R
PHONEBOOK IS
EMPTY
RDL MEMMENU
CHECK
PHONE LINE
RDL MEMMENU
CHECK
AC POWER
RDL MEMMENU
NO BASE
SUBSCRIPTION
OK
R
II