Operating instructions

49
Advanced Operation
Selecting the Ringer Melody
You can select the desired ringer melody of the handset and base unit
from #1 to #6. Your phone comes from the factory set to pattern #01.
Programming must be carried out separately for the handset and
base unit. Make sure that the unit is in the standby mode initially.
With the handset With the base unit
1
Press .
2
Press to
select “HANDSET SETTINGS”,
and press .
3
Press to
select “RINGER MELODY”, and
press .
4
Press to
select the desired ringer
melody.
•Each time you press
, the ringer
melody will change and ring.
Ex. #6 is selected.
5
Press .
•A beep sounds.
•After 10 seconds, the display
will return to the standby mode.
•
You can exit the programming mode
any time by pressing and holding
(OFF/CLEAR).
)
(
SAVE
)(
or
)
(
)(
or
)
(
)
(
OK
)(
or
)
(
)
(
OK
)(
or
)
(
)
(
MENU
1
Press (*) three times.
•A beep sounds, POWER and IN
USE indicators flash quickly on
the base unit.
2
Press the dialing buttons
((1) to (6)) to select the desired
ringer melody.
•Each time you press the dialing
buttons
((1) to (6)), the ringer
melody will change and ring.
3
Press (#).
•A beep sounds.
•You can exit the programming mode
any time by pressing
(*).
RINGER # 06
-
+
SAVE