Operating instructions

Making Intercom Calls
With the handset
1
Press (INTERCOM).
2
Enter (0).
OR
Press to select
“BASE”, and press .
•The handset and the base unit ring,
and then automatically switch to
intercom modes.
•To stop paging, press (OFF/CLEAR).
3
To end the intercom, press (OFF/CLEAR).
•In step 2, if you do not press any buttons for 10 seconds, the display will return to
the standby mode.
)(
or
)
(
Intercom
42
A 2-way intercom is possible between the handset and the base unit. The
included handset is assigned the handset number 1. The base unit
number is 0.
When using more than one handset, see pages 56–57.
CALLING
BASE
BASE
GLOBAL PAGE
FF
GG
OK
01
VOL MUTEHOLD
Ex. Handset 1 & Base unit are
in intercom modes.
Ex. Paging Base unit
)
(
OK
(LOCATOR/INTERCOM)
MIC
(INTERCOM)
Function Buttons
Display
(OFF/CLEAR)
(SP-PHONE)