Operation Manual
30
buttons during this process.
During the process, this screen appears.
Step
Step
Step
Step 5
5
5
5 – Finish the upgrade process once the
‘ Update rkimage complete. ’ message appears
by removing the MicroSD card from the Tabby
and pressing power button.
ATTENTION:
ATTENTION:
ATTENTION:
ATTENTION:
� Please DO NOT power off the Mini Tabby until the upgrading process has
finished.
� Please make sure the Tabby is FULLY CHARGED before starting
upgrading, in order to avoid not enough internal battery power for whole
upgrading process.
�
Please use the “ RESET ” button on the back (use a paperclip) if the
upgrade did not start and repeat the procedure described above.