Datasheet

BUTTON FUNCTION SETUP
1. Get into setup from the control desk or directly click into the mouse pattern
shown on right-down corner of the screen.
It shows the functions as following:
- Button: setup for habit of using right or left hand, adjustment of the speed of
continuously pressing twice the mouse buttons, adjustment of numbers of
column for each rolling.
- Mouse Marking: to set up the pattern or mouse marking.
- Wheel: to set up the functions of hot key, zooming, and rolling of
auto-turning.
- Motion: to set up the moving speed of mouse sign, the length of the dragging
tail, and non-border, etc.
2. After the function is set up, press “Yes” to store the new setup.
SETUP FOR MULTI USERS
When there is more than one unit of this product in a same place, the next one
must wait 30 seconds to do setup after the previous one has completed his setup.
ENVIRONMENT
To avoid environmental interference, which will shorten the effective distance, it
should be noted below:
1. Do not put the mouse and receiver on metal cabinet or metal desk.
It’s better no having metal or interference source around, which may affect
the RF communication, and shorten the communication distance.(fig. 6 ).
2. The ideal place for the mouse and receiver is having 15-20 cm distant from
computers or, any open place.
3. Keep a distance of more than 1.5m to avoid interference if there are other
RF devices in using.
4. The optical sensor of the mouse won’t work correctly while it is on a mirror,
glass, reflecting, half-tone painted surface, and 3D mouse pad.(fig. 6 )
16
17
MS108_Mini NB M MANUAL 04-06-2003, 10:4116-17