User manual

8
IR Extenders
IR Blaster [IR TX] IR Receiver [IR RX]
IR Sockets
VAS-E (TX)
IR Blaster: Plug in an IR blaster (IR TX) here to emit all IR command signals received from the IR
receiver (IR RX) on VAS-E receiver to control the associated devices with built-in IR
sensor
IR Receiver: Plug in an IR receiver (IR RX) here to receive all IR command signals from the IR remote
controls of the associated devices
VAS-E (RX)
IR Blaster: Plug in an IR blaster (IR TX) here to emit all IR command signals received from the IR
receiver (IR RX) on VAS-E transmitter to control the associated devices with built-in IR
sensor
IR Receiver: Plug in an IR receiver (IR RX) here to receive all IR command signals from the IR remote
control of the HDMI source device.
CAUTION!
Wrongly insert IR blaster and IR receiver to wrong 3.5mm infrared sockets may result
in the failure of the IR extenders. Please check carefully before plugging in the IR
extender to the respective IR sockets.
I
R PASS-THRU