User manual

6
Output Panel — VAS-E Receiver (RX)
17. IR Receiver: Connect to a IR RX cable
18. RS-232: Connect to a RS-232 device
19. Stereo OUT: Connect to analog audio output
20. S/PDIF OUT: Connect to digital audio output
21. VGA OUT: VGA output to a remote VGA display
22. IR Blaster: Connect to IR TX cable
Bottom Panel — VAS-E (receiver [RX])
DIP Switch Position
Description
Pin 1 Pin 2 Pin 3 Pin 4
ON
[Å]
OFF
[Æ]
ON
[Å]
OFF
[Æ]
TX&RX Extender Mode –
TxD
1
of VAS-E [TX] is connected to TxD of VAS-E [RX]
RxD
2
of VAS-E [TX] is connected to RxD of VAS-E [RX]
OFF
[Æ]
ON
[Å]
OFF
[Æ]
ON
[Å]
Master to Slave Mode –
TxD of VAS-E [TX] is connected to RxD of VAS-E [RX]
RxD of VAS-E [TX] is connected to TxD of VAS-E [RX]
1. TxD: The 3
rd
pin of RS-232, which is in charge of sending data
2. RxD: The 2
nd
pin of RS-232, which is in charge of receiving data
17 18 19
20 21
22