User manual

5
Output Panel — VAS-E Transmitter (TX)
8. +5V DC: inter-locked power jack to connect to 5V DC power supply unit
9. Local VGA: VGA loop-out to a local VGA display
10. System OUT: Connect to the System IN port on the VAS-E (RX) with a Cat-5 / 5e / 6 cable
11. Local S/PDIF: Digital stereo audio loop-out
12. Local Stereo: Analog stereo audio loop-out
Input Panel — VAS-E Receiver (RX)
13. +5V DC power jack: connect to 5V DC power supply unit
14. System IN: Connect to the System OUT port on the VAS-E (TX) with a Cat-5 / 5e / 6 cable
15. EQUALIZER: Rotary control for equalization (i.e., equalizing the waveform) of the VGA signal
16. GAIN: Rotary control for gain control (i.e., adjusting the amplitude) of the VGA signal
8
10
9
11
12
13 14
15
16
Reserved for VAS-EP only