User manual

2
With only one cost effective Cat- 5e / 6 cable, the VAS-E lets you extend VGA (WUXGA),
bi-directional IR signals and RS-232 serial commands at the same time to cover the distance up to
330m (1,000ft). The devices are composed of a transmitter and a receiver. The transmitter (TX) of
VAS-E is installed near the signal source and the receiver (RX) of VAS-E is placed near the desired
display. With built-in equalization and gain control, the transmission path can be adjusted to adapt
the cable quality and video bandwidth. In order to extend the control path, VAS-E also has built-in
RS-232 half-duplex long range extender along with VGA video signals.
Features
z Supports up to WUXGA [1920x1200@60] or UXGA [1600x1200@60] to 330m (1,000ft)
z Supports RS-232 half-duplex & bi-directional IR pass-through
z Supports analog stereo audio and S/PDIF digital audio
z Video and audio local out on transmitting unit
z Adjustable equalization and gain control on receiving unit
z Wall mounting housing design for easy installation
I
N
TRODUCTION