User`s manual

User’s Manual v.13 QVidium
®
H.264 HD Video Codecs™
Copyright 2011-2013 QVidium
®
Technologies, Inc. Page 64 of 67
Audio/Video Interfaces:
1 SD-SDI / HD-SDI / 3G-SDI (SMPTE 259M/292M/425M) video input (BNC connector)
1 SD-SDI / HD-SDI / 3G-SDI (SMPTE 259M/292M/425M) video output (BNC connector)
SMPTE 272M-ABC SDI including 2 channels of embedded audio (1 AES stereo pair), (4-channel
support is expected in a future release)
1 HDMI Input (QVPRO only)
1 HDMI Output (QVPRO and QVDEC)
2 3.5mm mini-phono inputs on QVENC,
2 3.5mm mini-phono outputs on QVDEC
S/PDIF (input on QVENC, output on QVDEC)
1 Composite (CVBS) on QVENC and QVDEC
1 S-Video input (Y/C) on QVENC
Transport Stream Bitrate (Audio & Video):
160 Kbps to 30.0 Mbps (encoding UDP/IP output for IP Transport mode)
Audio:
MPEG-1 Layer-II audio encoding, ISO/IEC-11172-3 Layer 2 standards compliant
MPEG2 and MPEG4 AAC audio encoding
Stereo bit rates: 56, 64, 128, 192, 256 & 384 Kbps
Sampling rates (non SDI input): 32 KHz, 44.1 KHz, and 48 KHz
SDI and HDMI (HD or SD) embedded audio at 48 KHz, 20-bit
Up to 4 mono-audio channels for encoding or decoding
AC3 Pass-through on QVENC and QVDEC.
Video:
4:2:0 MPEG-2 MP@ML encoding: ISO/IEC-13818-2 standards compliant
4:2:0 H.264/MPEG-4 AVC High Profile (Advanced Video Coding, Part 10)
Configurable between High Profile, Main Profile and Baseline Profile, encoding up to Level 4.1
HD Input: 1920x1080 @ 60 or 50 fps progressive (1080p), 1920x1080 @ 30 or 25 fps interlaced (1080i),
1280x720 @ 60 or 50 fps (720p)
HD encoding: 1920x1080 @ 50 or 60 fps progressive, 1920x1080 @ 25 or 30 fps interlaced, 1280x720 @
25 or 30 fps progressive
NTSC: 720x480, 352x240 (SIF resolution)
PAL: 720x576, 352x288 (CIF resolution)
Multiplexing Format: MPEG-2 Transport Stream & MP4. (MP4 for files only – not for live streaming)
Encode Line 21 Closed Captioning (EIA 608 only)
Video Up/Down Scaling and Frame-rate conversion for decoding
Video Down Scaling for encoding and transcoding
Minimum End-to-end latency (QVPRO/QVENC to QVPRO/QVDEC): < 300 ms,
Closed Captioning:
EIA-608 on Line 21 for QVENC and QVPRO encoding only
CEA-708 Ancillary Data on SDI input for QVENC encoding only
Decoder support planned for Q2 2013
Serial Interfaces:
1 DB-9 RS-232 Console Interface
1 DB-9 RS-232 with VISCA PTZ support and for future expansion (QVPRO only)
2 USB 2.0 Ports for video storage
Configuration and Monitoring:
Web setup & monitoring interface over IP network
SNMP v1 & v2c traps (optional)
Electrical:
AC Power Input: 100-240VAC, 150 mA, 50/60Hz
DC Power Input: 7 VDC @ 3 A max, to 20 VDC @ 1 A max
Auto sensing AC power adapter included
Mechanical: (see relevant datasheet)
Unit Weight: 4 lbs
Rack mount bracket, up to 2 units in 1 RU