User`s manual

User’s Manual v.13 QVidium

H.264 HD Video Codecs™

Technologies, Inc. Page 26 of 67

the MPEG2 Transport Stream.

Optionally output … as a UDP stream: This feature allows you to send a copy of the ARQ

output stream as a local UDP stream. This allows for local monitoring of the encoder’s output,

including as a UDP multicast. You can specify both an independent UDP/IP destination

address and an independent port number for this copy of the output stream.

WARNING: DO NOT ENTER THE SAME IP ADDRESS AS THE “DESTINATION IP

ADDRESS”. Doing so will send two conflicting streams to the decoder,

ProMPEG FEC: For legacy compatibility, the QVPRO can add ProMPEG Forward Error

Correction (Release 3.2, Annex B), part of the SMPTE-2022 standard, to the output stream as

an alternative to ARQ. These settings allow for setting of the FEC parameters. Because ARQ

is feed-back based, it is significantly more effective than FEC.

Figure 1c: Advanced Encoder Network Configuration.