User`s manual

User’s Manual v.13 QVidium

H.264 HD Video Codecs™

Technologies, Inc. Page 12 of 67

1.8 System View – QVENC

Front

View – Computer Interface ports and Indicators

(All indicator lights either glow green or are off.)

Ref Indicator/Switch Description

1 SDI Glows green with active SD-SDI or HD-SDI input.

2 CVBS* Glows green with a valid composite or S-Video input signal.

3 Power Glows green when the power is connected and unit is on.

4 Reset Various reset functions. See description in manual.

*Note: Whether this indicates Composite (CVBS) or S-Video (Y/C) depends upon video input

selection from last time encoder was started. Defaults to CVBS indicator at power-on.

Ref Port Description

5 USB 2 USB 2.0 Ports (external storage or LCD console or LAN2).

6 Console RS-232 Console Interface via DB-9 Connector.

7 LAN LAN1 autosensing 10/100/1000-Base-TX Gigabit Ethernet Ports.

8 DC Power* Alternate DC power input (7 – 20 Vdc).

*Note: DC Power input can be used simultaneously with AC input as an emergency backup,

or by itself.