Installation Guide

2of3
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2016 QuoizelInc.
(Step 5 Continued)
B. Insert the Wall Anchor (F) into
the drilled hole on the ceiling.
Pass the Support Base over
the Wall Anchor (F) and then
screw the self-tapping screw
(G) through the Support Base
into the wall anchor until tight.
C. Thread the Pipe of Rail
Support into the Support Base
and hand tighten until snug.
G
CEILING
F
Support
Base
Pipe of
Rail Support
Figure 6
STEP 6 Instal Rail to Rail Support
NOTE: The Shallow V-Groove on the Rail is always facing
towards the ceiling.
-
A. Carefully take out the Rail (D) from the package and unfold it. There
is an Indented Groove and an Brass Strip in one side of the Rail (D).
B. Pull the Moveable Part of the Rail Support up. Attach the Rail (D)
with the indented groove facing towards the fixed part of Rail
Support, securely into the Rail Support.
D. Close the moveable part of Rail Support (C) over the rail, then
reinstall the Caps to the Rail Support (C).
Cap
Brass Strip
Rail
Support
Moveable part
of Rail Support
Figure 7
Figure 8
C
STEP 7 Install Rail to Ceiling Canopy-
A. Unscrew the Cap from the Rail Adapter, and then pull the Moveable
Part of the Rail Adapter body up.
B. Place the Rail (D) with the indented groove facing towards the
Cap
Brass Strip
Rail Adapter
Moveable Part
of Rail Adapter
B
D
Rail
Brass Strip
Shallow V-Groove
Rail Support
Brass Clip
Brass Clip
Brass Clip
(Step 7 Continued)
Note: The Shallow V-Groove on the Rail is always facing towards
the ceiling.
fixed part of the Rail Adapter. Connect the Brass Clip on the Fixed
Part of the Rail Adapter to the Brass Strip on the same side of the
Indented Groove properly.
C. Close the Moveable Part of Rail Adapter over the Rail (D), then
restore the caps back to the Rail Adapter. Make certain that the Brass
Clip on the Moveable Part of Rail Adapter is connected properly with
the Brass Strips of the Rail (D).
D. Shape the Rail (D) as desired. Then mark and drill the desired
positions on the ceiling for the rest of the Rail Supports (C). Repeat
the steps of Rail Supports Installations to locate the rest Rail
Supports. Then Follow steps STEP 6 of Rail Installation to install the
Rail onto the other rail supports.
Stuck
Point
Brass Clip
STEP 8 Spot Light Installation
CAUTION: To ensure the fixture works correctly, make sure the
connection between the adapter and the rail is correct. The
Shallow V-Groove on the Rail is always facing towards the
ceiling.
Note: Adjust the spotlight head to a desired position by using
the swivel.
-
A. Choose one spot light, unscrew the Cap from the Rail Adapter of the
Spot Light (E), then pull the Moveable Part of Rail Adapter body
down.
B. Attach the Rail Adapter of the Spot Light (E) onto the Rail (D). Close
the Moveable Part of Rail Adaptor over the Rail (D), then reinstall
the Cap to the Rail Adapter. Make sure that Brass Clips on the
Adapter are touched to Brass Strips of the Rail properly.
C. Follow steps A~B to install the other spot lights onto the rail.
Your fixture is now assembled and ready to use. Enjoy!
Cap
Rail
Adapter
Moveable Part
of Rail Adapter
Spot Light
Head
E
D
Indented
Groove
Shallow V-Groove
Rail Adapter
Rail
Brass
Strip
Swivel
Shallow V-Groove
Brass Strip
Rail
Rail Support
Indented Groove
Fixed Part
of Rail Support
Indented Groove
Figure 9
Figure 10
Figure 11
Figure 12
Fixed Part
of Rail Adapter
ReleaseDate:2016-03-30