Installation Sheet

Pleasegoto forproductcleaningtips.Gotothe selection.
(2)MediumBaseBulbs100WMaximum
20-30minutes
Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtobesureallpartsare
present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomerserviceforreplacement
parts.
www.quoizel.com Care+Maintenance
BulbRecommended:
Estimated Assembly Time:
Preparation:
ToolsRequired:None.
Warnings and Cautions
1of1
Assembly Instruction Sheet #IS-TF3180FVB
For Style TF3180FVB
2017 QuoizelInc.
ReleasedDate:2017-03-02
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.
Care of Tiffany Style Shade
A new tiffany lamp shade has an oil film applied to the shade that protects the tiffany shade from scratches during shipment. If the oil applied is
too heavy you can remove the excess oil film with a paper towel. Gently wipe away the excess oil.
For general cleaning of tiffany shades use a gentle lemon oil-based furniture polish applied to a soft cloth and wipe gently.
If a white powder appears on the soldered joints of the tiffany shade this is a normal oxidation process. Use a small amount of lemon oil or
mineral oil applied directly to oxidized areas and the soldered area will return to like new.
A. Thread Socket Assembly, Tube,
Tubes with Nipple and Base
together as shown. Hand
tighten until snug. Pull cord
from Base as you assemble
parts together to remove the
excess cord between parts.
B. Thread the Hex Nut end of
Nipple with Hex Nut into hex
coupling on the top center of
Socket Assembly. By using
pliers, thread the Hex Nut
against hex coupling and hand
tighten until snug.
C. Pass Spacer Tube and Check
Ring over the top end of Nipple
with Hex Nut and secure with
Small Knurled Nut.
D. Thread Big Knurled Nut onto
Nipple and adjust it to proper
location for rest components.
Place Flat Washer and Shade
over the top end of Nipple and
secure with Finial. Hand tighten
until snug.
E. Insert bulbs onto sockets and
screw snugly into place.
Your fixture is now assembled
and ready to use. Enjoy!
Finial
x1
Shade
x1
Bulb (not
included)
TF3180FVB
NOTE: ALL DIMENSIONS ARE ROUNDED
UP TO THE NEAREST 1/4"
Flat Washer
x1
Big Knurled
Nut x 1
Check Ring
x1
4.5”L
Spacer Tube
x1
Small
Knurled Nut
x1
Base
x1
5”L Nipple
with Hex Nut
x1
18” Dia.
8.5”
62”
9.75” Dia.
Cord
Socket
Assembly
x1
FINISH: VINTAGE BRONZE
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
Tube with
Nipple
x2
Tube with
Nipple
Tube
x1