Installation Guide

ManualsBrandsQuoizel ManualsFloor LampsTF2601FVB

1of1

Assembly Instruction Sheet #IS-TF2601FVB

For Style TF2601FVB

6 CORPORATE PARKWAY

GOOSE CREEK SC 29445

www quoizel com

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700

or visit us on-line at www.quoizel.com

2015 Quoizel Inc.

December2015

A. Thread the Socket

Assembly, the Rod, the Rod

with Nipple and the Base

together as shown. Pull the

cordfromtheBaseasyou

assemble the parts

together to remove the

excess cord between parts.

B. Thread the Hex Nut end of

the Nipple with Hex Nut into

the hex coupling on the top

center of the Socket

Assembly. By using pliers,

thread the Hex Nut against

the hex coupling and hand

tighten until snug.

C. Pass the Spacer Tube and

the Check Ring over the top

end of the Nipple with Hex

Nut and secure with the

Small Knurled Nut.

D. Thread the Big Knurled Nut

onto Nipple and adjust it to

proper location for rest

components. Place the Flat

Washer and the Shade over

the top end of the Nipple

and secure with the Finial.

Hand tighten until snug.

E. This fixture uses standard

bulb with medium base .

Maximum 100 watts. Insert

bulb and screw snugly into

place.

Your fixture is now

assembled and ready to

use. Enjoy!

Hand tighten until snug.

Finial

Bulb (not

included)

TF2601FVB

NOTE:

ALL DIMENSIONS ARE

ROUNDED UP TO THE

NEAREST 1/4"

(3) 100W

Bulbs

(Not Supplied)

Medium

Base

Pleasegoto forproduct cleaningtips. Goto the selection.

(3)Medium Base100W bulbMaximum,Alternatebulb (3)23WCFLMaximum.

15-20minutes

Identifyand inspectall partsbefore beginninginstallation. Checkpackage contentlist anddiagrams belowto besure allparts are

present.If anyparts aremissing ordamaged, donot attemptto assemble,install, oroperate thefixture. Contactcustomer servicefor replacement

parts.

www.quoizel.com Care+ Maintenance

LightSource:

Estimated Assembly Time:

Preparation:

Tools Required: None.

Warnings and Cautions

Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.

These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly

recommend that a licensed, professional electrician perform the installation.

Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject

glass parts to any shock while in operation or shattering may result.

Care of Tiffany Style Shade

A new tiffany lamp shade has an oil film applied to the shade that protects the tiffany shade from scratches during shipment. If the oil applied is

too heavy you can remove the excess oil film with a paper towel. Gently wipe away the excess oil.

For general cleaning of tiffany shades use a gentle lemon oil-based furniture polish applied to a soft cloth and wipe gently.

If a white powder appears on the soldered joints of the tiffany shade this is a normal oxidation process. Use a small amount of lemon oil or

mineral oil applied directly to oxidized areas and the soldered area will return to like new.

Shade

Flat Washer

Big

Knurled

Nut x 1

Small Knurled

Nut x 1

Check

Ring

Spacer Tube

Nipple with

Hex Nut

Socket

Assembly

Rod

with

Nipple

Cord

Hex

Coupling

PART NUMBER REPLACEMENT PART

QTY.

NO.

12601FVBTF

BASE

G12713SH

SHADE

FINISH: VINTAGE BRONZE

21” Dia.

12.5” Dia.

9.25”

61”