User Manual

2of2
2016 QuoizelInc.
RevisedDate:2016-10-26
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
STEP 5 - Wire Connections
A. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
Figure 5
White wire
from outlet box
White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Bare, or Green
Ground wire
from outlet box
Ground wire
from fixture
Bare, or Green
Ground wire
from outlet box
OR
Ground wire
from fixture
Green Ground Screw
on the Crossbar
TB8603C
NOTE: ALL DIMENSIONS ARE ROUNDED UP
TO THE NEAREST 1/4"
6.5”
FINISH: POLISHED CHROME
(Step 4 Continued)
adjust the length of the Mounting Screws (DD) or Alternate Short
Mounting Screws (FF) on the Crossbar by unscrewing the Hex Nuts
(CC) and Lock Washers (BB) and then screwing the Mounting
Screws (DD) or Alternate Short Mounting Screws (FF) in or out of
the Crossbar (AA) until the correct length is achieved. Once the
backplate and Fixture Body (A) is secure, remove the Mounting
Balls (EE) and Fixture Body (A) and proceed to Step 5.
STEP 6 Install the Fixture Body-
A. Position the backplate and
Fixture Body (A) onto the
. Secure the
by using the Mounting Balls
(EE) and hand tighten the
until snug.
Mounting Screws (DD) or
Alternate Short Mounting
Screws (FF)
backplate and Fixture Body (A)
Mounting Balls (EE)
A
Backplate
Mounting Screw
or Alternate Short
Mounting Screw
EE
Figure 6
STEP 7 - Install Cages, Glass Shades and
Bulbs
A. Place the Cage (F), the Glass Shade (E) and
the Steel Collar (D) over the socket as
shown. By using the Socket Collar Tool (G),
thread the Socket Collar (C) onto the socket
to secure them together. Hand tighten until
snug.
B. Insert the bulb onto socket and screw snugly
into place.
Your fixture is now assembled and ready to
use. Enjoy!
Bulb (not
supplied)
A
Socket
G
F
E
D
C
Figure 7
26”
5” Dia.
7”
3.5” Dia.
5”