Installation Sheet

2of2
2017 QuoizelInc.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
ReleasedDate:2017-11-08
STEP 5 Install the Fixture-
A. Carefully tuck all wires into the outlet box and position the ceiling
canopy and Fixture Body (B) over the outlet box. Align the holes in
the ceiling canopy with the mounting screws, then attach the ceiling
canopy and Fixture Body (B) using the previously removed
mounting balls. Hand tighten until snug.
Figure 5
STEP 6 Install Cage and Bulbs-
A. Remove lock screws from the side of the ceiling canopy.
B. Insert bulbs onto sockets and screw snugly into place.
C. Lift the cage with glass panels upward and align the holes on tabs at
the top edge of the Cage (C) to mounting holes on the side of the
ceiling canopy. Secure them by threading previously removed lock
screws back into mounting holes. Hand tighten until snug.
Your fixture is now assembled and ready to use. Enjoy!
Figure 6
SRE1616AGL
FINISH: AGED GOLD
NOTE: ALL DIMENSIONS ARE ROUNDED
UP TO THE NEAREST 1/4"
STEP 4 - Wire Connections
A. Wrap bare or green ground wire around green ground screw on the
crossbar, no less than 2 inches from the end of the wire. Tighten the
green ground screw.
B. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
Figure 4
Green Ground Screw
on the Crossbar
White wire
from outlet box
White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Bare, or Green
Ground wire
from outlet box
Ground wire
from Fixture
Mounting Screw
Mounting Ball
A
B
Bulb (not
supplied)
Socket
C
Lock Screw
B
Ceiling Canopy
Tab
16” Dia.
15” Dia.
13.25” Dia.
5.5”
7”
2.5”