Installation Sheet
2of2
2018 QuoizelInc.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
ReleasedDate:2018-01-31
STEP 6 Install Bulbs-
A. Insert bulbs onto sockets and screw snugly into place.
Your fixture is now assembled and ready to use. Enjoy!
Socket
Bulb (not
supplied)
RDY1717AWH
NOTE: ALL DIMENSIONS ARE ROUNDED UP
TO THE NEAREST 1/4"
Figure 6
5.5” Dia.
16.25”
17.5” Dia.
FINISH: ANTIQUE WHITE
STEP 5 Install the Fixture
Body
-
A. Position the ceiling canopy
and fixture body onto the
Crossbar Assembly (A).
Place the holes in the ceiling
canopy over the mounting
screws. Secure the fixture
body by using the mounting
balls and hand tighten the
mounting balls until snug.
Figure 5
Mounting
Screw
Mounting Ball
A
Ceiling
Canopy
STEP 4 - Wire Connections
A.
B. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
Wrap bare or green ground wire around green ground screw on the
crossbar, no less than 2 inches from the end of the wire. Tighten the
green ground screw.
Figure 4
Green Ground Screw
on the Crossbar
White wire
from outlet box
White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Bare, or Green
Ground wire
from outlet box
Ground wire
from Fixture