Installation Sheet

2of2
2018 QuoizelInc.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
ReleasedDate:2018-01-31
STEP 5 Install the Fixture Body-
A. Position the ceiling canopy and fixture body onto the Crossbar
Assembly (A). Place the holes in the ceiling canopy over the
mounting screws. Secure the fixture body by using the mounting
balls and hand tighten the mounting balls until snug.
Figure 5
Mounting Screw
Mounting Ball
A
STEP 6 Install Bulbs-
A. Insert bulbs onto sockets and screw snugly into place.
Your fixture is now assembled and ready to use. Enjoy!
Figure 6
Socket
Bulb (not
supplied)
RDY1712AWH
FINISH: ANTIQUE WHITE
NOTE: ALL DIMENSIONS ARE ROUNDED UP
TO THE NEAREST 1/4"
12.5” Dia.
5.5” Dia.
13.5”
Ceiling Canopy
STEP 4 - Wire Connections
A.
B. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
Wrap bare or green ground wire around green ground screw on the
crossbar, no less than 2 inches from the end of the wire. Tighten the
green ground screw.
Figure 4
Green Ground Screw
on the Crossbar
White wire
from outlet box
White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Bare, or Green
Ground wire
from outlet box
Ground wire
from Fixture