Installation Sheet

ManualsBrandsQuoizel ManualsCeiling FixturesQuoizel Cohen Single Light 12" Wide Integrated LED Flush Mount Bowl Ceiling Fixture

STEP 3 Install Fixture Body-

A. Align Mounting Screws (B) to keyholes on the Fixture Body (D) and

twist the Fixture Body (D) until the Fixture Body (D) is hung safety.

B. By using Phillips screwdrivers, tighten Mounting Screws (B) from

keyholes on the Fixture Body (D) as needed to secure the Fixture

Body (D).

1of2

For Style QF5131C

Pleasegoto forproductcleaningtips.Gotothe selection.

LED16W

20-30minutes

Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtoensureallpartsare

present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactyouroriginalplaceofpurchase.

www.quoizel.com Care+Maintenance

LightSource:

EstimatedAssemblyTime:

Preparation:

ToolsRequired:Flatheadscrewdriver, Phillips screwdriver,pliers,wirecutters,wirestrippers,electricaltape,safetyglasses.

Installation Guide #IS-QF5131C

2019 QuoizelInc.

ReleasedDate:2019-03-15

visit us on-line at www.quoizel.com

Warnings and Cautions

Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.

These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly

recommend that a licensed, professional electrician perform the installation.

Package Contents

Crossbar

Fixture Body

Mounting

Screw

Glass Shade

Lock Screw

STEP 1 Install Crossbar-

A. Measure the distance between two keyholes on the top of the

Fixture Body (D). Use this distance to identify corresponding

mounting holes on the Crossbar (A) and thread Mounting Screws (B)

into mounting holes.

Figure 1

Outlet Box Screws

(not included)

Outlet Box

Green Ground

Screw

Keyhole

BOTTOM VIEW OF

FIXTURE BODY

BOTTOM VIEW OF

FIXTURE

BODY

(Step 1 Continued)

B. Attach slots on the Crossbar (A) to mounting holes on outlet box

with the head of green ground screw facing you. Secure the

Crossbar (A) with outlet box screws (not included). Tighten until

snug with screwdrivers

C. Test fit the Fixture Body (D) to Mounting Screws (B) and adjust

the length of Mounting Screws (B) so that the Fixture Body (D)

flush against the ceiling after installation. You may need to test fit

more than one time to achieve the correct length of the Mounting

Screw (B).

STEP 2 - Wire Connections

A. Wrap bare or green ground wire around green ground screw on the

crossbar, no less than 2 inches from the end of the wire. Tighten the

green ground screw.

B. Use standard wire connectors (not included) to make all wire

connections. Twist connectors until wires are tightly joined together.

Wrap each connection with approved electrical tape and carefully

stuff all the connected wires into the Outlet Box.

Green Ground Screw

on the Crossbar

White wire

from outlet box

White wire

from fixture

Black wire from

outlet box (or Red)

Black wire

from fixture

Bare, or Green

Ground wire

from outlet box

Ground wire

from Fixture

Figure 2

137

20-

RS5-

000K

Ra9

TVS

DB1

U1c

Rcs2

RD2

U2b

Rcs1

RD1

U2a

U1b

RD3

U2c

R1b

R2b

R2a2

U1a

R2a1

HIGHVOLTAGE

CAUTION

R1a

C1a

Rcs3

Rcap1

Rcap2

R4a

R4b

CX1

RV1

DD1

DD2

Figure 3

Phillips

Screwdriver

Keyhole

Outlet Box

Summary of content (2 pages)

PAGE 1
Installation Guide #IS-QF5131C For Style QF5131C Please go to www.quoizel.com for product cleaning tips. Go to the Care + Maintenance selection. Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses. Light Source: LED 16W Estimated Assembly Time: 20-30 minutes Preparation: Identify and inspect all parts before beginning installation. Check package content list and diagrams below to ensure all parts are present.
PAGE 2
STEP 4 - Install Glass Shade D A. Place the Glass Shade (E) onto the Fixture Body (D) as shown. Thread Lock Screws (C) onto the Fixture Body (D) and hand tighten gently until the heads of Lock Screws (C) are engaged in the Glass Shade (E). E Your fixture is now assembled and ready to use. Enjoy! C Figure 4 QF5131C FINISH: POLISHED CHROME NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/4" 12” Dia. 3” 2” 10.5” Dia. 2019 QuoizelInc. visit us on-line at www.quoizel.