Installation Sheet

2of2
2018 QuoizelInc.
ReleasedDate:2018-10-18
visit us on-line at www.quoizel.com
STEP 4 - Wire Connections
A. Wrap bare or green ground wire around green ground screw on the
crossbar, no less than 2 inches from the end of the wire. Tighten the
green ground screw.
B. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
Green Ground Screw
on the Crossbar
White wire
from outlet box
White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Bare, or Green
Ground wire
from outlet box
Ground wire
from Fixture
Figure 4
STEP 5 Install Ceiling Canopy to Crossbar-
A. Attach the Fixture Body (F) over the end of the nipple and secure
with previously removed mounting ball. Hand tighten until snug.
F
Nipple
Mounting Ball
Figure 5
STEP 6 Install Bulbs and Cage-
A. Insert bulbs onto sockets and screw snugly into place.
B. Place the Cage (G) onto the Fixture Body (F) and secure with Lock
Screws (B). Hand tighten until snug with screwdrivers.
Your fixture is now assembled and ready to use. Enjoy!
T8 Vintage Bulb
(Recommended
but not included)
Socket
Figure 6
G
B
F
QF4059K
FINISH: MYSTIC BLACK
NOTE: ALL DIMENSIONS ARE ROUNDED UP
TO THE NEAREST 1/4"
17.5” Dia.
4.25”