Installation Sheet

1of2
Assembly Instruction Sheet #IS-QF3416BN
For Style QF3416BN
Package Contents
Pleasegoto forproductcleaningtips.Gotothe selection.
Flatheadscrewdriver,Phillipsscrewdriver,pliers,wirecutters,wirestrippers,electricaltape,safetyglasses.
IntegratedLED11W
www.quoizel.com Care+Maintenance
ToolsRequired:
LightSource:
EstimatedAssemblyTime:
Preparation:
20-30minutes
Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtobesureallpartsare
present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomerserviceforreplacement
parts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
2017 QuoizelInc.
ReleasedDate:2017-10-16
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
Crossbar
x1
A
STEP 1 Install Crossbar-
A. Attach the Crossbar (A) to the outlet box and align the slot holes on
the Crossbar (A) to mounting holes on the outlet box. Secure them
together with outlet box screws (not supplied) and hand tighten until
snug with screwdrivers.
Figure 1
Figure 2
STEP 3 Make Wire Connections-
Wrap ground wire around green ground screw on the
crossbar, no less than 2 in from the end of the wire. Tighten
.
B. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
A. bare or green
ches the
green ground screw
Figure 3
Green Ground Screw
on the Crossbar
White wire
from outlet box
White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Bare, or Green
Ground wire
from outlet box
Ground wire
from Fixture
Mounting Screw
x2
B
Ceiling Canopy
x1
C
Glass Shade
x1
D
Outlet Box Screw
(not supplied)
Outlet Box
A
STEP 2 Install Mounting Screws-
A. Align Mounting Screws (B) to keyholes on the Ceiling Canopy (C)
and mounting holes on the Crossbar (A). Thread Mounting Screws
(B) into the mounting holes on the Crossbar (A).
Outlet Box
B
A
C
Keyhole
Mounting
Hole
STEP 4 Install Ceiling
Canopy
-
A. Fit the heads of Mounting
Screws (B) into keyholes on
the Ceiling Canopy (C).
Rotate the Ceiling Canopy (C)
until heads of Mounting
Screws (B) seat on the small
ends of keyholes. Carefully
release your hands and tight
Mounting Screws (B) until
snug.
B
C
Keyhole
Outlet Box
A
Figure 4
ROTATE
STEP 5 Install Glass Shade-
A. Attach the Glass Shade (D)
onto the Ceiling Canopy (C)
and rotate the Glass Shade (D)
until it is seated on the
embosses in the Ceiling
Canopy (C) properly.
Your fixture is now assembled
and ready to use. Enjoy!
ROTATE
Figure 4
D
C
Emboss