Installation Sheet

1of2
Assembly Instruction Sheet #IS-PCWR1615C
For Style PCWR1615C
Package Contents
B
Mounting Screw
x3
Inner Backplate
x1
A
Figure 1
2017 QuoizelInc.
ReleasedDate:2017-11-07
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Pleasegoto forproductcleaningtips.Gotothe selection.
Flatheadscrewdriver, Phillips screwdriver,pliers,wirecutters,wirestrippers,electricaltape,safetyglasses.
Integrated33WLED
:LutronAYCL-153PorLutronDVCL-153P.
www.quoizel.com Care+Maintenance
ToolsRequired:
LightSource:
CompatibleDimmerSwitches
EstimatedAssembly Time:
Preparation:
20-30minutes
Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtobesureallpartsare
present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomerserviceforreplacement
parts.
STEP 1 - Install Inner Backplate and Fixture Body
A. Pass the supply wires and ground wire through the Inner Backplate
(A). Attach the Inner Backplate (A) to Outlet Box with the head of
Green Ground Screw facing you. Secure it with Outlet Box Screws
(not included). Tighten until snug.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
C
Fixture Body
x1
D
Glass Shade
x1
Outlet Box
A
Outlet Box Screw
(not supplied)
Supply Wires
and Ground Wire
STEP 2 Make Wire Connections-
Wrap ground wire around green ground screw on the
inner backplate, no less than 2 in from the end of the wire.
Tighten .
A. bare or green
ches
the green ground screw
Figure 2
Green Ground Screw
on the Inner Backplate
White wire
from outlet box
White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Bare, or Green
Ground wire
from outlet box
Ground wire
from Fixture
(Step 2 Continued)
B. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
STEP 3 Install Fixture Body-
A. Attach the ceiling canopy and the Fixture Body (C) over the Inner
Backplate (A) and secure with Mounting Screws (B). Tighten until
snug with screwdrivers.
A
C
B
Figure 3
STEP 4 Install Glass Shade-
A. Align the arrow label on the Glass Shade (D) to the arrow label on
the adjustable glass holder. Insert the Glass Shade (D) to two fixed
glass holders first. Pull the adjustable glass holder out of the ceiling
canopy and Fixture Body (C). Attach the Glass Shade (D) against
the ceiling canopy. Carefully release the adjustable glass holder to
make sure it is engaged to the Glass Shade (D).
Your fixture is now assembled and ready to use. Enjoy!
C
D
Fixed Glass
Holder
Adjustable
Glass Holder
Arrow Label
Arrow Label
Figure 4