Manualshelf

Installation Sheet

ManualsBrandsQuoizel ManualsCeiling FixturesQuoizel Venus 5 Light 16" Wide Flush Mount Ceiling Fixture with Glass Shades
123
2of3
STEP 4 Install the Fixture Body-
A. Position the Fixture Body (E) onto the Inner Backplate (A). Place
cross-cuts on the insulation inside of the ceiling canopy and the
Fixture Body (E) over the mounting screws. Secure by using the
mounting balls and hand tighten the mounting balls until snug.
2017 QuoizelInc.
ReleasedDate:2017-08-31
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
Figure 4
STEP 5 Install Crystals and Bulbs
IMPORTANT:
-
A. (Refer to Crystals Distribution) Attach Crystal A [(3) Beads w/ (1)
Drop] to the Fixture Body (E) first. Then attach Crystal B [(1) Bead
w/ (1) Drop] and Crystal C [Crystal Tube] to the Fixture Body (E).
B. Insert bulbs (F) onto sockets and push snugly into place.
Do not touch the bulb with bare hands use a cloth or
glove.
Your fixture is now assembled and ready to use. Enjoy!
E
F
Socket
CRYSTALS DISTRIBUTION
Figure 5
Mounting Ball
E
Mounting Screw
Figure 3
Crystal A
Crystal B
Crystal C
A
A
A
A
A
B
B
B
B
B
B
BB
B
B
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
STEP 3 Make Wire Connections-
Wrap ground wire around green ground screw on the
crossbar, no less than 2 in from the end of the wire. Tighten
.
B. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
A. bare or green
ches the
green ground screw
Green Ground Screw
on the Crossbar
White wire
from outlet box
White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Bare, or Green
Ground wire
from outlet box
Ground wire
from Fixture
Insulation Inside
of Ceiling Canopy
Cross-cut
Ceiling Canopy
CAUTION FOR BULB REPLACING
A. When replace bulb, turn off power and allow lamp to cool. For safety purpose, wear gloves and eye protection.
B. If bulb is scratched or cracked, DO NOT use the lamp to avoid breakage during use or installation.
C. Use only in fixtures rated for lamps wattage and voltage.
D. Lamp operate under high pressure generating intense heat. Prevent contact with liquid and combustible materials.