Installation Sheet

Package Contents
Warnings and Cautions
1of2
For Style PCSB1716C
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.
Do not touch the bulb with bare hands use a cloth or glove.
A
Crossbar
x1
Pleasegoto forproductcleaningtips.Gotothe selection.
(6)G9ClearXenonBulbs40WMaximum(included).
20-30minutes
Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtoensureallpartsare
present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactyouroriginalplaceofpurchase
www.quoizel.com Care+Maintenance
LightSource:
EstimatedAssemblyTime:
Preparation:
ToolsRequired: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
Fixture Body
x1
D
Figure 1
STEP 1 - Install the Crossbar
to the junction box
A. Attach the Crossbar (A) to the
Outlet Box with the head of
the Green Ground Screw
facing you. Secure it with
Outlet Box Screws (not
included), tighten until snug.
STEP 2 - Wire Connections
A. Wrap bare or green ground wire around green ground screw on the
crossbar, no less than 2 inches from the end of the wire. Tighten the
Figure 2
Green Ground Screw
on the Crossbar
White wire
from outlet box
White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Bare, or Green
Ground wire
from outlet box
Ground wire
from Fixture
Installation Guide #IS-PCSB1716C
2018 QuoizelInc.
ReleasedDate:2018-08-15
visit us on-line at www.quoizel.com
Mounting Screw
x2
B
Glass Shade
x6
C
(Step 2 Continued)
green ground screw.
B. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
Figure 3
STEP 3 - Install the Fixture Body
A. Place the ceiling canopy of the Fixture Body (D) onto the
Crossbar (A) and secure with Mounting Screws (B). Tighten until
snug with screwdrivers.
Ceiling Canopy
B
D
A
Figure 4
STEP 4 - Install Bulbs and Glass Shades
A. Insert Bulbs (C) onto sockets and push snugly into properly.
B. Thread the Glass Shade (E) onto the socket and hand tighten until
snug.
Your fixture is now assembled and ready to use. Enjoy!
G9 Clear
Xenon Bulb
x6
E
Socket
Supply Wires
with Ground Wire
Outlet Box Screws
(not included)
A
Green Ground Screw
Outlet Box
Outlet Box
C
E
D