Installation Sheet

ManualsBrandsQuoizel ManualsCeiling FixturesQuoizel Clear Hollow 6 Light 19-1/4" Wide Integrated LED Flush Mount Ceiling Fixture with Pressed Crystal Shades

Package Contents

1of2

Assembly Instruction Sheet #IS-PCHL1718C

For Style PCHL1718C

Crossbar

Mounting Screw

STEP 1 - Adjust Lamp Tube

A. Place the Fixture Body (D) onto a flat working surface with support

arms facing you. Carefully rotate support arms to your desired

directions.

Note: The support arm next to the ceiling canopy is the fixed arm,

which cannot be rotated.

2018 QuoizelInc.

ReleasedDate:2018-02-05

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184

or visit us on-line at www.quoizel.com

Fixture Body

Figure 1

Pleasegoto forproductcleaningtips.Gotothe selection.

Flatheadscrewdriver, Phillips screwdriver,pliers,wirecutters,wirestrippers,electricaltape,safetyglasses.

LED24W

www.quoizel.com Care+Maintenance

ToolsRequired:

LightSource:

EstimatedAssemblyTime:

Preparation:

20-30minutes

Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtobesureallpartsare

present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomerserviceforreplacement

parts.

Warnings and Cautions

Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.

These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly

recommend that a licensed, professional electrician perform the installation.

Crystal

Fixed Arm

(next to the

ceiling canopy)

Fixed Arm

(next to the

ceiling canopy)

ROTATE

Fixed Arm

(next to the

ceiling canopy)

Ceiling

Canopy

STEP 2 - Install Crystals

A. Remove lock screws from sockets.

B. Attach Crystals (C) onto sockets and secure with previously removed

lock screws. Hand tighten until snug with screwdrivers gently.

Figure 2

Lock Screw

Socket

STEP 3 Install the Crossbar

to the junction box

A. Attach the Crossbar (A) to the

Outlet Box with the head of

the Green Ground Screw

facing you. Secure it with

Outlet Box Screws (not

included), tighten until snug

Outlet Box

Outlet Box Screw

(not included)

Figure 3

STEP 4 - Wire Connections

A. Wrap bare or green ground wire around green ground screw on the

crossbar, no less than 2 inches from the end of the wire. Tighten the

green ground screw.

B. Use standard wire connectors (not included) to make all wire

connections. Twist connectors until wires are tightly joined together.

Wrap each connection with approved electrical tape and carefully

stuff all the connected wires into the Outlet Box.

Figure 4

Green Ground Screw

on the Crossbar

White wire

from outlet box

White wire

from fixture

Black wire from

outlet box (or Red)

Black wire

from fixture

Bare,orGreen

Ground wire

from outlet box

Ground wire

from Fixture

Summary of content (2 pages)

PAGE 1
Assembly Instruction Sheet #IS-PCHL1718C For Style PCHL1718C Please go to www.quoizel.com for product cleaning tips. Go to the Care + Maintenance selection. Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses. Light Source: LED 24W Estimated Assembly Time: 20-30 minutes Preparation: Identify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts are present.
PAGE 2
STEP 5 - Attach Ceiling Canopy to Crossbar Figure 5 A. Line up the holes on the side of the ceiling canopy to the mounting holes on the Crossbar (A). Secure them with Mounting Screws (B). Tighten until sung. A Your fixture is now assembled and ready to use. Enjoy! B Ceiling Canopy PCHL1718C NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/4" FINISH: POLISHED CHROME 6” Dia. 5” Dia. 8” 2” 19.25” Dia. 2” 2” 2018 QuoizelInc. Thank you for purchasing a Quoizel product.