Installation Sheet

2of2
2018 QuoizelInc.
ReleasedDate:2018-03-13
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
STEP 6 - Attach Fixture Body to Inner Backplate
A. Place the Fixture Body (F) to Inner Backplate (A) and secure with
Mounting Screws (B). Hand tighten Mounting Screws (B) until snug
with screwdrivers.
Your fixture is now assembled and ready to use. Enjoy!
STEP 5 - Wire Connections
A. Wrap bare or green ground wire around green ground screw on the
crossbar, no less than 2 inches from the end of the wire. Tighten the
green ground screw.
B. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
Green Ground Screw
on the Crossbar
White wire
from outlet box
White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Bare, or Green
Ground wire
from outlet box
Ground wire
from Fixture
Figure 5
Figure 6
A
B
F
PCEM1614C
FINISH: POLISHED CHROME
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/4"
13.75”
3.75”
13.75”