Installation Sheet

2of2
2017 QuoizelInc.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
ReleasedDate:2017-08-14
STEP 4 - Wire Connections
A. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
Figure 4
White wire
from outlet box
White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Bare, or Green
Ground wire
from outlet box
Ground wire
from fixture
Bare, or Green
Ground wire
from outlet box
OR
Ground wire
from fixture
Green Ground Screw
on the Crossbar
(Step 3 Continued)
screwing the mounting screws in or out of the crossbar until the
correct length is achieved. Once the ceiling canopy and Fixture
Body (B) is secure, remove the mounting ball and ceiling canopy and
Fixture Body (B) and proceed to Step 4.
MID1712BN
FINISH: BRUSHED NICKEL
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/4"
5.5” Dia.
12” Dia.
14.5”
9.75”
STEP 5 Install the Fixture-
A. Carefully tuck all wires into the outlet box and position the ceiling
canopy and Fixture Body (B) over the outlet box. Align the holes in
the ceiling canopy with the mounting screws, then attach the ceiling
canopy and Fixture Body (B) using the previously removed
mounting balls. Hand tighten until snug.
Your fixture is now assembled and ready to use. Enjoy!
Figure 5
Mounting Screw
Mounting Ball
A
B
Ceiling Canopy