Installation Guide
GVR1910K
FINISH: MYSTIC BLACK
2of2
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2014 QuoizelInc.
AA
BB
CC
Step B
Step A
DD
CC
BB
EE
II
FF
Figure 4
STEP 5 - Install Fixture Chain and Ceiling Canopy
A. Adjust the Fixture Chain (GG) to your desired length by removing
the links if needed.
Pliers is required for this step.
B. With the Fixture Chain (GG) not attached to the Fixture Loop and
the Canopy Chain Loop (EE), pull the supply wires through the
Fixture Chain (GG) alternating links. After the wires are through the
*
Figure 5
DD
GG
II
Supply
Wires and
Ground Wire
EE
FF
HH
HH
STEP 6 - Wire Connections
A. Use standard wire connectors (not included) to make all wire
connections. (Connectors are not included with fixture.) Twist
connectors until wires are tightly joined together. Wrap each
connection with approved electrical tape and carefully stuff all the
connected wires into the Outlet Box.
White wire
from supply
Ribbed side wire
from fixture
Black wire from
supply (or Red)
Smooth side wire
from fixture
Ground wire
from supply
Ground wire
from fixture
Figure 6
Fixture
Loop
STEP 7 - Install Bulb
A. This fixture uses standard bulb
with medium screw base.
Maximum 150 watts.
B. Insert bulb and screw snugly
into place.
Your fixture is now assembled
and ready to use. Enjoy!
Bulb
Figure 7
Socket
November2014
Fixture Chain (GG), pull the
Supply Wires and the Ground
Wire through the Canopy Lock
Ring (FF) and the Ceiling Canopy
(II) in order.
C. Attach one end of the Fixture
Chain (GG) to the Fixture Loop
with one Quick Link (HH). Lift the
fixture and Fixture Chain (GG) up
And Attach the other end of the
Fixture Chain (GG) onto the
Canopy Chain Loop (EE) with
another Quick Link (HH). The
fixture will now hang safely. Close
the chain loop at the Ceiling
Canopy Loop (EE).
D. Feed the Supply Wires and
Ground Wire through the Canopy
Chain Loop (EE) and Nipple (DD)
into the Outlet Box. Cut the wires
leaving approximately 8” of wire
extending from the Outlet Box.
E.RefertoStep6forwire
connections.
F. Raise the Ceiling Canopy (II) and
Canopy Lock Ring (FF) up the
Fixture Chain (GG) and over the
Canopy Chain Loop (EE). Tighten
the Canopy Lock Ring (FF) onto
the Canopy Chain Loop (EE) until
tight.
Suggested chain length for
Ceiling height :
8’ ceiling : use 9 links of chain and
2 quick links
9’ ceiling : use 19 links of chain
and 2 quick links
10’ ceiling : use 29 links of chain
and 2 quick links
4.5”Sq.
1”
119.5”OVERALL HEIGHT
INCLUDES 96” CHAIN
AND 2 QUICK LINKS
(
)
17.5”
12.5”
7”Sq.
1
10.5”
10.5”
PART NUMBER
NOTE: ALL DIMENSIONS
ARE ROUNDED UP TO
THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
REQ.
(1) 150W
Bulb
(Not Supplied)
Medium
Base
1
NO.
PART NUMBER
REPLACEMENT PART DESCRIPTION
REQ.
G4023PA PANEL CLEAR WATER GLASS 4