Installation Sheet

1of3

2019 QuoizelInc.

visit us on-line at www.quoizel.com

ReleasedDate:2019-09-26

For Style DNM9010EK

Installation Guide

LightSourceToolsRequired

BULB BASE TYPE

Medium (E26)

BULB SHAPE

TYPE A

150W

MAX

1BULBREQUIRED

BULBNOTINCLUDED

Warnings and Cautions

Turn off the electricity at the circuit breaker

before installation. Consult a licensed

electrician if in doubt about installation.

Turn off power to the fixture and allow the bulbs

to cool before replacing.

Package Contents

PARTS BAG

Preparation: Identify and inspect all parts before beginning the installation.

Missing or damaged parts? Contact your original place of purchase.

Wiring

Bulb

Table of

Contents

STEP 3

STEP 1

Fixture Body

STEP 4

Drill Holes

STEP 2

Wire Connector

Fixture Body

Mounting Screw

Replace Shade

STEP 5

PAGE 1
Installation Guide For Style DNM9010EK Tools Required Light Source 150W MAX BULB BASE TYPE BULB SHAPE Medium (E26) TYPE A Warnings and Cautions Turn off the electricity at the circuit breaker before installation. Consult a licensed electrician if in doubt about installation. Turn off power to the fixture and allow the bulbs to cool before replacing. 1 BULB REQUIRED BULB NOT INCLUDED Package Contents Preparation: Identify and inspect all parts before beginning the installation.
PAGE 2
STEP 1 1 Remove cage and glass STEP 2 1 Step 1 Place Post Fitter to Post 2 3 Remove styrofoam Install bulb 4 Install glass and cage 2 3 Step 2-3 Mark Mounting Holes Location on Post 2 1 1/16” Drill Bit Step 4 Drill Holes 4 2019 QuoizelInc. visit us on-line at www.quoizel.
PAGE 3
STEP 3 White wire (neutral) from outlet box White wire from fixture Black or Red wire (hot) from outlet box Black wire from fixture Ground wire from Fixture Bare or Green ground wire from outlet box STEP 4 STEP 5 - How To Replace Glass 1 2 Remove cage Replace glass Reinstall cage 3 2019 QuoizelInc. visit us on-line at www.quoizel.