Installation Guide

2of2
2016 QuoizelInc.
BNY1716C
FINISH: POLISHED CHROME
1
2
(3) 100W
Bulbs
(Not Supplied)
Medium
Base
PART NUMBER REPLACEMENT
QTY.
NO.
1
2
J1137DI
DIFFUSER
1
1
S12741FA
OUTER SHADE
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/4"
Released2016-04-26
STEP 6 Install Bulb and Diffuser-
A. This fixture uses standard bulb with medium screw base. Maximum
100 watts. Insert bulb and screw snugly into place.
B. Thread the beaded end of the center Stem (D) into the Coupling
Coupling
J
I
F
D
Socket
Bulb
Figure 6
5”Dia.
12”
6”
13.25”Dia.
14”Dia.
16.25”Dia.
5.75”
3
1
S12770FA
INNER SHADE
G
H
HOW TO REPLACE SHADE
A. Unlock the Finial and remove it from fixture.
.,
the fixture.
B Unscrew the Hex Nut and remove Flat Washer Rubber Washer and
Diffuser. Remove the Center Stem from
Figure 7
3
underside of the Socket
Assembly. Hand tighten until
snug.
C. Place the Diffuser (J) over the
end of the Center Stem (D).
Attach the Diffuser (J) to the
Tabs inside the bottom edge of
the inner Shade. Place the
Rubber Washer (F) and Flat
Washer (G) over the end of the
Center Stem (D) and secure
with the Hex Nut (H). Tighten
until sung gently.
D. Thread the Finial (I) onto the
Center Stem (D) and hand
tighten until snug.
Your fixture is now assembled
and ready to use. Enjoy!
Tab
Lock Ball
Inner
Shade
Outer
Shade
Lock
Screw
Dffuseri
Fnalii
Hex Nut
Rubber Washer
Flat Washer
Center
Stem
C.
D. Reverse above steps to
reinstall the replacement
Inner Shade onto fixture.
Unscrew Lock Ball on the
Socket Assembly and
remove Inner Shade.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com