Installation Sheet

ManualsBrandsQuoizel ManualsWall SconcesQuoizel Bardstown Single Light 18" Tall Outdoor Wall Sconce

Package Contents

Warnings and Cautions

1of3

For Style BDS8408AGV

Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.

These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly

recommend that a licensed, professional electrician perform the installation.

Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.

Crossbar

Assembly

Pleasegoto forproductcleaningtips.Gotothe selection.

(1)A19MediumBaseBulb100WMaximum,MediumBaseVintageBulbsisrecommended,bulbnotincluded.

20-30minutes

Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtoensureallpartsare

present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactyouroriginalplaceofpurchase.

www.quoizel.com Care+Maintenance

LightSource:

EstimatedAssembly Time:

Preparation:

Fixturecanonlybemountedinthedirectionindicatedonpage2.

ToolsRequired:Flatheadscrewdriver,Phillipsscrewdriver,pliers,wirecutters,wirestrippers,electricaltape,safetyglasses.

Fixture Body

Installation Guide #IS-BDS8408AGV

2018 QuoizelInc.

ReleasedDate:2018-09-12

visit us on-line at www.quoizel.com

Alternate

Mounting screw

Lock screw

Glass Panel

Cage

STEP 1 Install Glass Panel-

A. Insert the Glass Panel (F) into the slot in the bottom edge of the

Cage (E) and press the tabs on the top edge of the Cage (E) onto

the top edge of the Glass Panel (F) to secure it.

Slot

Tab

Figure 1

STEP 2 Install Cage-

A. EAlign the tabs in the top edge of the Cage ( ) to the tabs in the

fixture hood on the Fixture Body (D). Secure by threading Lock

Screws (C) onto the tabs and hand tighten until snug with

screwdrivers.

Figure 2

STEP 3 Installing the Crossbar Assembly-

A. Pass the supply wires through the Crossbar Assembly (A). Attach

the Crossbar Assembly (A) to the Outlet Box with the head of the

Green Ground Screw facing you. Secure the Crossbar Assembly (A)

with Outlet Box Screws (not included). Tighten until snug

Note: Use the Alternate Shorter Mounting Screw (B) if your

installation requires a shorter mounting screw.

Mounting Screw

or Alternate Short

Mounting Screw

Supply Wires

with Ground Wire

Outlet Box Screws

(not included)

Outlet Box

Figure 3

Tab

Fixture Hood

Summary of content (3 pages)

PAGE 1
Installation Guide #IS-BDS8408AGV For Style BDS8408AGV Please go to www.quoizel.com for product cleaning tips. Go to the Care + Maintenance selection. Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses. Light Source: (1) A19 Medium Base Bulb 100W Maximum, Medium Base Vintage Bulbs is recommended, bulb not included. Estimated Assembly Time: 20-30 minutes Preparation: Identify and inspect all parts before beginning installation.
PAGE 2
STEP 4 - Test Fit the Backplate to the Crossbar Assembly STEP 6 - Install the Fixture Body A. Remove the mounting balls from the Crossbar Assembly (A). Place the backplate and Fixture Body (D) onto the Crossbar Assembly (A) and secure with mounting balls. Note: The backplate and Fixture Body (D) should be snug against the wall and held tight with the mounting balls.
PAGE 3
BDS8408AGV NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/4" FINISH: AGED VERDE 8” 9.5” 4.5” 7.25” 7” 18” Fixture can only be mounted in the direction indicated 2018 QuoizelInc. visit us on-line at www.quoizel.