Installation Sheet

1of1
For Style BBY8624C
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.
Pleasegoto forproductcleaningtips.Gotothe selection.
(3)A19MediumBase100WbulbMaximum,bulbnotincluded.
30-45minutes
Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtoensureallpartsare
present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.MissingParts?Contactyouroriginalplaceof
purchase.
www.quoizel.com Care+Maintenance
LightSource:
EstimatedAssembly Time:
Preparation:
ToolsRequired:Flatheadscrewdriver,Phillipsscrewdriver,pliers,wirecutters,wirestrippers,electricaltape,safetyglasses.
Installation Guide #IS-BBY8624C
2018 QuoizelInc.
ReleasedDate:2018-12-27
visit us on-line at www.quoizel.com
Package Contents
Fixture Body
x1
C
D
Cage
x3
B
Mounting
Screw
x2
Crossbar
x1
A
STEP 1 Install Crossbar and Fixture Body-
A. Pass the supply wires through the Crossbar (A). Attach the Crossbar
(A) to Outlet Box with the head of Green Ground Screw facing you.
Outlet
Box
Outlet Box Screw
(not supplied)
Supply Wires and
Ground Wire
A
C
B
Figure 1
Figure 2
Green Ground Screw
on the Crossbar
White wire
from outlet box
White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Bare, or Green
Ground wire
from outlet box
Ground wire
from Fixture
STEP 2 - Wire Connections
A.
B. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
Wrap bare or green ground wire around green ground screw on the
crossbar, no less than 2 inches from the end of the wire. Tighten the
green ground screw.
BBY8624C
24”
11.75"
8"
4.5” Dia.
6.5”
FINISH: Polished Chrome
NOTE: ALL DIMENSIONS ARE ROUNDED UP
TO THE NEAREST 1/4"
STEP 3 - Install the Cage
and the Bulb
a. Insert the bulb onto the
socket and screw snugly
into place.
b. Place the bolts of the Cage
(D) into the holes of the
hood (C) and secure with
lock balls (E). Hand-
tighten until snug.
Your fixture is now
assembled and ready to
use. Enjoy!
Figure 3
D
E
Lock ball
x6
Vintage Bulb
(recommended
but not included)
C
E
Socket
Hood
Secure it with Outlet
Box Screws (not
included). Tighten until
snug
B.RefertoStep2for
wiring connections.
C. Attach the Fixture Body
(C) over the Crossbar
(A) and secure with
Mounting Screws (B).
Tighten until snug with
screwdrivers.
.