User's Manual

3
• Use provided adhesive on the sensor. Attach the sensor to the door. Press firmly and hold in place
for a few seconds.
Magnet Setup
1. Attach the magnet on the location next to the sensor by using either one of the following methods:
• Remove the back plate of the magnet; use this as the mounting bracket. Use the screwdriver to
secure the back plate to the wall with the screws provided.
• Use provided adhesive on the magnet. Attach the sensor to the door. Press firmly and hold in
place for a few seconds.
2. Make sure the alignment marks of both devices are facing each other.