User's Manual


IN STALLATION
WARNING: RISK OF ELECTRIC SHOCK
• Disconnect power to switch at the circuit breaker.
• If you are unsure about any of the instructions,
consult a qualified electrician.
• Test the existing light switch to make sure the circuit
breaker is o.
NOTE
• Installation by a qualified electrician is strongly recommended.
• Relay can only be used with a single or double gang box.
Do not install in a multi-gang box unit.
• Replaces single or double light switches not wired
to an AC outlet.
We recommend installing Relay in a double gang box
so you will have the ability to control two light loads
rather than one.