User's Manual

 
• To use your existing wall
plate: Unscrew the top
and bottom screws on
the assembly and remove
the snap plate. Attach
your wall plate only.
Note: The included
faceplate and snap plate
are intended for single
gang box installations
only. If installing in a
double gang box, use a
double gang wall plate
(not included) without
the faceplate and
snap plate.
8 Turn power on at
the circuit breaker.
9 Confirm Outlink is
working by pressing the
middle button on the
outlet. There is a white
LED light next to the top
outlet that will turn on.
10 If not working, be sure
to turn off power at the
circuit breaker before
you fix the wiring.