Instructions

Model No.
Date
QU-TK-F3x
2019/1/10
1.03
Communication Protocol
QUIO
Ver.
Page
QU-TK-F3 Series
49 / 52
2
.
Software Setting allows host machine to set address of the dispenser machine by sending commands.
Software setting is available on certain specified models.
Host Machine uses 0F address as broadcasting address to set target machine address from 0x01 to 0x0E
(1~14 in decimal)
HOST Command
“
C” FFH 30H Addr
Positive response
P” FFH
“
30H
30H
st0
e1
st1
e0
st2
Negative response
N” FFH
“
9.16 LED control
LED control command is applicable on certain models for controlling ON/OFF and flashing of the LED indicator on the
bezel.
Host Command:
“
C” 31H 60H CMP
Positive Response:
“
P”
31H
60H
st0
st1
e0
st2
RDT
Positive Response:
“
N”
31H
60H
e1
CMP -> One byte, for LED1 control.
BIT7-BIT6 for LED1 work mode as defines below:
0
0
0
x00：LED1 off;
x01：LED1 on；
x02：LED1 flash.
BIT0-BIT5 for flash periods in 100ms. 0xff for always flashing.
0
x03 to disable LED control
QUIO
https://www.quio-rfid.de Email: [e-mail]