Instructions

Model No.
Date
QU-TK-F3x
2019/1/10
1.03
Communication Protocol
QUIO
Ver.
Page
QU-TK-F3 Series
41 / 52
1. Ultralight Card only have one block in one sector，every block have 4 byte data. S50,S70
have16 byte data in one block
2. Ultralight Card, Mifare 1k(S50), Mifare 1k (S70) card card range of capacity is shown as
below:
Ultralight Card: sn=00H-0FH,
bn=00H-03H, lc=01H-03H
Mifare 1k(S50):
Mifare 1k(S70):
sn=00H-0FH, bn=00H-03H, lc=01H-03H
sn=00H-20H, bn=00H-03H, lc=01H-03H
sn=21H-27H,
(last 8 sectors of S70 card have 16 blocks)
. S50,S70 card last block of each sector is control sector to preserve Key A, read/write control
bn=00H-0FH, lc=01H-0FH
3
words, Key B.
Cautions: Do note write last block and QU-TK-F31 also will prohibid to write last block.
9
.10.4.7 Initialization
HOST Command
“
C” 60H 33H 00H D2H
sn
bn
lc
w-data
Positive response
“
P” 60H 33H
st0
e1
st1
e0
st2
r-data
Negative response
“
N” 60H 33H
Initialization operation to RF card
sn(1 byte): sector number
bn(1 byte): block number
lc(1byte): length lc=04H
w-data: data (4 byte)
r-data (2 byte): return data
(Positive response with data 9000H and negative response with “sw1+sw2”)
Notes: Mifare 1k(S50), Mifare 1k (S70) card operation sector
(Sector cannot be out of range and last block cannot be operated)
Mifare 1k (S50): sn=00H-0FH, bn=00H-03H,
Mifare 1k (S70): sn=00H-20H, bn=00H-03H,
sn=20H-27H, bn=00H-0EH,
(S70 card last 8 sectors have 16 blocks)
9
.10.4.8 Read value
HOST Command
“
C” 60H 33H 00H
B1H
sn
bn
Positive response
QUIO
https://www.quio-rfid.de Email: [e-mail]