Instructions

Model No.
Date
QU-TK-F3x
2019/1/10
1.03
Communication Protocol
QUIO
Ver.
Page
QU-TK-F3 Series
40 / 52
Positive response
“
P” 60H 33H
st0
e1
st1
e0
st2
rdata
Negative response
“
N” 60H 33H
Read block and sequence blocks from RF card
sn (1 byte):
bn (1 byte):
le (1 byte):
sector number
block number
block number (le=01H read one block, le=03H read three blocks)
rdata (2 byte):
return data
(Positive response with data 9000H, and negative response with “ sw1+sw2”)
Notes:
1
.Ultralight Card only have one block in one sector，every block have 4-byte data. S50, S70
have16-byte data in one block.
. Ultralight Card, Mifare 1k (S50), Mifare 1k (S70) card range of capacity is shown as below:
Ultralight Card: sn =00H-0FH, bn=00H, le=01H-0FH
2
Mifare 1k (S50): sn =00H-0FH,bn=00H-03H, le=01H-04H
Mifare 1k (S70): sn =00H-20H,bn=00H-03H, le=01H-04H
sn =21H-27H, bn=00H-0FH, le=01H-10H (S70 card last 8 sectors have 16 blocks)
9
.10.4.6 Write sector data
HOST Command
“
C” 60H 33H 00H
D1H
st1
sn
bn
lc
w-data
Positive response
“
P” 60H 33H
st0
e1
st2
r-data
Negative response
“
N” 60H 33H
e0
Read block and sequence blocks from RF card
sn (1 byte):
bn (1 byte):
le (1 byte):
wdata:
sector number
block number
block number
block to write (n byte)
return data
rdata (2 byte):
(Positive response with data 9000H and negtive response with “sw1+sw2”)
Notes:
QUIO
https://www.quio-rfid.de Email: [e-mail]