Instructions

Model No.
Date
QU-TK-F3x
2019/1/10
1.03
Communication Protocol
QUIO
Ver.
Page
QU-TK-F3 Series
37 / 52
Mifare one, ISO/IEC 14443 Type A return UID (The length of UID_data)
UID_len=4 The length of UID_data is 4 byte.
UID_len=7 The length of UID_data is 7 byte.
UID_len=10 The length of UID_data is10 byte.
9.10.2 Deactivate RFID card
HOST Command
“
C” 60H 31H
Positive response
“
P” 60H 31H
st0
e1
st1
e0
st2
Negative response
“
N” 60H 31H
Deactivate RFIN card and Output signal to antanna is closed.
9
.10.3 Inquire status of RFID card
HOST Command
“
C” 60H 32H
Positive response
“
P” 60H 32H
st0
e1
st1
e0
st2
sti
stj
Negative response
“
N” 60H 32H
Inquire status of RFID sti,stj:
sti
stj
Specification
‘
‘
0’
1’
‘0’
‘0’
Deactivated RF
Mifare one S50 card
Mifare one S70 card
Mifare one UL card
‘
‘
1’
2’
‘
‘
2’
3’
‘0’
‘0’
Type A CPU card
Type B CPU card
9
.10.4 Mifare 1 card control
These functions are specified by a command data form like C-APDU which format is based on
T=0 standard.
In this case, QU-TK-F31 recognizes the meaning of the command data, and executes the treatment
related to the card by controlling hardware.
After the command was executed properly, QU-TK-F31 returns a positive response with response
data 9000H like from the IC card. When an error occurs during the communication with Mifare 1
card QU-TK-F31 returns a positive response with status information in response data "sw1+sw2”
QUIO
https://www.quio-rfid.de Email: [e-mail]