Instructions

Model No.
Date
QU-TK-F3x
2019/1/10
1.03
Communication Protocol
QUIO
Ver.
Page
QU-TK-F3 Series
36 / 52
ATQA( 2 byte), UID_data (4—10 byte) and SAK( 1 byte).
2).ISO/IEC 14443 Type A: 1.Request A (REQ A)/ Answer Request A (ATQ A).
2.Anticollision
3.Select (SEL) / Unique Identifier (UID) & Select Acknowledge
(SAK)
4
5
.Request for answer to select (RATS) / Answer to Select (ATS)
.Protocol and parameter selection request (PPSR)/PPS start
(PPSS)
When ISO/IEC 14443 Type A card successfully activated, QU-TK-F31 return:
Mifare card return value increase (ATS (1-254 byte) and protocol parameter (1 byte))
3).ISO/IEC 14443 Type B: 1.Request B (REQ B)/ Answer Request B (ATQ B).
2.Attribute (A TTRIB)/ Answer to ATTRIB
When ISO/IEC 14443 Type B card successfully activated, QU-TK-F31 return ATQB 12 byte
(including following information):
50H, PUPI (4 byte), App.data(4 byte), Protoclol info (3 byte)
Notes:
Set1, Set2 set sequence of operation for different type of protocol
Valid value: 41H (‘A’= Type A )，42H(‘B’= Type B ), 30H( ‘0’= Do not use)
Ex1:Set1=‘A’，Set2 =‘B’ (default)
Activate sequence: Type A protocol (first sequence), Type B protocol (second sequence)
Ex2:Set1=‘B’，Set2 =‘A’
Activate sequence: Type B protocol (first sequence), Type A protocol (second sequence)
Ex3:Set1=‘A’，Set2 =‘0’
Activate sequence: Type A protocol (first sequence), Type B protocol (Deactivated)
Ex4:Set1=‘B’，Set2 =‘0’，
Activate sequence: Type B protocol (first sequence), Type A protocol (Deactivated)
Rtype: Protocol
=
=
=
41H (‘A’) In line with ISO/IEC 14443 Type A protocol
42H (‘B’) In line with ISO/IEC 14443 Type B protocol
4DH (‘M’) In line with Philips Mifare one card protocol
When Rtype= 4DH (‘M’)
ATQA= 0044H Mifare Ultralight Card
ATQA= 0004H Mifare S50 1K Card
ATQA= 0002H Mifare S70 4K Card
QUIO
https://www.quio-rfid.de Email: [e-mail]