Instructions

Model No.
Date
QU-TK-F3x
2019/1/10
1.03
Communication Protocol
QUIO
Ver.
Page
QU-TK-F3 Series
35 / 52
“
N” 54H 34H
e1
e0
This command is recognized as follows.
abH: The upper address of head address which begins to write data
cdH: The lower address of head address which begins to write data
efH: The number of bytes of data to write
ghH: the data to write first (the head data of the data on ef H bytes)
QU-TK-F31 read efH length and return to HOST according to address specified by abH, cdH.The
length of efH cannot be surpass the length of I2C address up limit.
The example which data on 8bytes are written into I2C
Ex) "CU3"+ 00D0000008 + Write Data (8bytes)
After command execution, ICRW returns response with 9000H or sw1+sw2 as the result.
9
.10 Contactless IC card Operation
9
.10.1 Activated contactless IC card
HOST Command
“
C” 60H 30H
Set1
Set2
(1) Mifare One Card Positive Response
P” 60H 30H st0 st1
“
st2
Rtype ATQA
UID_len
UID_data
SAK
Mifare One Dard Negative Response
N” 60H 30H e1 e0
“
Rtype
st2
ATQA
UID_len
UID_data
SAK
(2) 14443 Type A Card Positive Response
P” 60H 30H st0 st1
“
Rtype ATQA UID_len
UID_data
SAK
ATS
ATS
1
4443 Type A Card Negative Response
N” 60H 30H e1 e0
“
Rtype
st2
ATQA
UID_len UID_data
SAK
(3) 14443 Type B Card Positive Response
P” 60H 30H st0 st1
“
Rtype
ATQB
1
4443 Type b Card Negative Response
N” 60H 30H e1 e0
“
Rtype
ATQB
Activate RFID card
QU-TK-F31 support activated IEC/ISO14443 Type A and IEC/ISO 14443 Type B
The process is show as below:
1).Mifare one card: 1.Request A ( REQ A)/ Answer Request A (ATQ A).
2.Anticollision
3.Select (SEL) / Unique Identifier (UID) & Select Acknowledge (SAK)
When Mifare card successfully activate, QU-TK-F31return:
QUIO
https://www.quio-rfid.de Email: [e-mail]