Instructions

Model No.
Date
QU-TK-F3x
2019/1/10
1.03
Communication Protocol
QUIO
Ver.
Page
QU-TK-F3 Series
31 / 52
Negative response
“
N” 53H 34H
e1
e0
Notes: abcH: the start address to write data in the main memory
de H: the number of bytes of data to write
fg H: the data to write first (de H bytes)
QU-TK-F31 writes data in the main memory. QU-TK-F31 returns a result after written data are
checked.
Before doing this operation, password check must be done.
9
.8.5.5 Written with protection-bit
HOST Command
“
C” 53H 34H 00H
D0H
st1
2aH bcH
deH
fgH…
Positive response
“
P” 53H 34H
st0
e1
st2
data
Negative response
“
N” 53H 34H
e0
Notes: abcH: the start address to write data in the main memory
de H: the number of bytes of data to write
fgH: the data to write first (de H bytes)
Before doing this operation that writing data with protection-bit, password check must be done
After command execution, ICRW returns response with 9000H or sw1+sw2 as the result.
QU-TK-F31 reads data first from the main memory, and it is compared with the value that it was
received.
When this is wrong, writing isn't begun. Protection condition can be set up at a time in the data
which continued in the main memory.
9
.8.5.6 Verification of password present to SLE4428
HOST Command
“
C” 53H 34H 00H 20H 00H 00H 02H
efH…
Positive response
“
P” 53H 34H
st0
e1
st1
e0
st2
data
Negative response
“
N” 53H 34H
Notes: efH: the data to compare (2bytes)
Before changing data, Password must be checked properly with SLE4428.
Because this function should be made effective, the issue of the next command is necessary.
QUIO
https://www.quio-rfid.de Email: [e-mail]