Instructions

Model No.
Date
QU-TK-F3x
2019/1/10
1.03
Communication Protocol
QUIO
Ver.
Page
QU-TK-F3 Series
29 / 52
9
.8.5 SLE4428 Control
These functions are specified by a command data form like C-APDU which format is based on
T=0 standard.
In this case, QU-TK-F31 recognizes the meaning of the command data, and executes the
treatment related to the card by controlling hardware.
After the command was executed properly, QU-TK-F31 returns a positive response with response
data 9000H like from the IC card. When an error occurs during the communication with
SLE4442, QU-TK-F31 returns a positive response with status information in response data
"
sw1+sw2” which is base on ISO/IEC 7816-3
Sw1
Sw2
00H
00H
01H
02H
00H
00H
Specification
Success
90H
6FH
6FH
6FH
6BH
67H
Fail
Key Validation error
Key Validation error and Lock
Address overflow
Operation length overflow
9
.8.5.1 Data Reading of main-memory of SLE4428
HOST Command
“
C” 53H 34H 00H
B0H
0aH bcH deH
Positive response
“
P” 53H 34H
st0
e1
st1
e0
st2
data
Negative response
“
N” 53H 34H
Notes: abc H: the start address to read data in the main memory
de H: the number of bytes of data to read
QU-TK-F31 read data from main memory of SLE4428 through abcH and deH
The capacity of the main memory is 1024bytes.
De="00"
Data to read means 256bytes.
The head part of the main memory can be read with the following command.
Ex) "CR4"+00B0000000
9
.8.5.2. Reading of protection-bit of SLE4428
HOST Command
“
C” 53H 34H 00H
B0H
10H abH cdH
Positive response
QUIO
https://www.quio-rfid.de Email: [e-mail]