Instructions

Model No.
Date
QU-TK-F3x
2019/1/10
1.03
Communication Protocol
QUIO
Ver.
Page
QU-TK-F3 Series
25 / 52
9
.8.3 Inquire status of SLE4442/4428:
HOST Command
“
C” 53H 32H
Positive response
“
P” 53H 32H
st0
e1
st1
e0
st2
Sti
Negative response
“
N” 54H 32H
QU-TK-F31 tells the status of SLE4442/4428 with Sti after the command successfully execute.
Sti= 30H
Sti= 31H
Sti= 32H
SLE4442/4428 Deactivated
SLE4442
SLE4428
Activated
Activated
9
.8.4 SLE4442 Control
These functions are specified by a command data form like C-APDU which format is based
on T=0 standard.
In this case, QU-TK-F31 recognizes the meaning of the command data, and executes the
treatment related to the card by controlling hardware.
After the command was executed properly, QU-TK-F31 returns a positive response with
response data 9000H like from the IC card. When an error occurs during the communication
with SLE4442, QU-TK-F31 returns a positive response with status information in response data
"
sw1+sw2” which is based on ISO/IEC 7816-3
Sw1
Sw2
00H
00H
01H
02H
00H
00H
Specification
90H
6FH
6FH
6FH
67H
6BH
Success
Fail
Key Validation error
Key Validation error and Lock
Address overflow
Operation length overflow
9
.8.4.1. Data read from main memory on SLE4442
HOST Command
“
C” 53H 33H 00H B0H 00H abH cdH
Positive response
“
P” 53H 33H
st0
e1
st1
e0
st2
data
Negative response
“
N” 53H 33H
Notes: ab H: the start address to read data in the main memory
QUIO
https://www.quio-rfid.de Email: [e-mail]