Instructions

Model No.
Date
QU-TK-F3x
2019/1/10
1.03
Communication Protocol
QUIO
Ver.
Page
QU-TK-F3 Series
22 / 52
“63” is sent.
If any other protocol error occurs, QU-TK-F31 deactivates an IC card and error code “64” is sent.
If HOST tries to communicate before IC card activation, error code “65” is sent.
Note: Refer to ISO/IEC7816-3 and COS command for more about T=1 APDU
9.7.6 SAM Warm Reset
HOST Command
“
C” 52H 38H
Positive response
“
P” 52H 38H
st0
e1
st1
e0
st2
Type
ATR
Negative response
“
N” 52H 38H
Keeping the status of the SAM activated, then returns response upon receiving.
Type: SAM protocol type
=30H T=0 Protocol
=31H T=1 Protocol
9
.7.7Auto-Check SAM Card T=0/T=1 Protocol
HOST Command
“
C” 52H 39H
C-APDU
Positive response
“
P” 52H 39H
st0
st1
e0
st2
R-APDU
Negative response
“
N” 52H 39H
e1
If IC Card power error, return e1,e0=“60”
If protocol type of IC card is not T=0, error code e1,e0= “62”is sent.
If ICC does not respond within Working Wait Time, QU-TK-F31 deactivates an IC card and returns
error code e1,e0=“63”.
If any other protocol error occurs, QU-TK-F31 deactivates the IC card and returns error code
e1,e0=“64”.
If HOST tries to communicate before IC card activation, error code e1,e0=“65” is sent.
QUIO
https://www.quio-rfid.de Email: [e-mail]